Samsung Galaxy J1 Mini J105BUBU0APC5
SM-J105B 5 countries Android 5.1.1 (Lollipop)

Samsung Galaxy J1 Mini J105BUBU0APC5 Firmware

Samsung Galaxy J1 Mini J105BUBU0APC5 is an Android 5.1.1 (Lollipop) firmware for 5 countries, 7 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J105BDXU0APC4, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-J105B is available: J105BUBS0ASB1.

Download firmware
8.8/10 (458)30,563 times
Android 5.1.1 (Lollipop)
OS Version
2016-03-23
Build Date
5
Countries
7
CSC codes
0
Bootloader binary

Bootloader binary 0. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    ModelRegionCSC VersionMODEM/CP VersionRelease dateSizeFile nameDownload
    SM-J105B
    COM Colombia
    		J105BUWA0APC2J105BUBU0APC4 2016-04-15 1022.589 MiB
    SM-J105B_1_20170210132039_h6vdwcvkv5_fac.zip
    		Download
    SM-J105B
    COO Colombia
    TPA Panama
    TTT Trinidad & Tobago
    		J105BUUB0APC2J105BUBU0APC5 2016-04-15 977.215 MiB
    SM-J105B_1_20180407110253_ybgtqc4itk_fac.zip
    		Download
    SM-J105B
    EON Trinidad & Tobago
    		J105BUUB0APC2J105BUBU0APC5 2016-04-26 975.468 MiB
    SM-J105B_1_20171213091940_jw9aw9yxic_fac.zip
    		Download
    SM-J105B
    PNT Peru
    		J105B0APC2J105BUBU0APC5 — — — Download
    SM-J105B
    ZTO Brazil
    		J105B0APC2J105BUBU0APC5 — — — Download

    No matching downloads

    How to flash J105BUBU0APC5

    • J105BUBU0APC5 has bootloader binary 0. Your device must run binary 0 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of J105BUBU0APC5 by region

    First release
    April 15, 2016
    Last region
    April 26, 2016
    Duration
    12 days
    Regions
    5
    1. Day 1 · · 4 regions
      ColombiaCOMCOOPanamaTPATrinidad & TobagoTTT
    2. Day 12 · · 1 region
      Trinidad & TobagoEON

    Device specifications

    • Display diagonal10.2 cm (4")
    • Display resolution480 x 800 pixels
    • Display typeTFT
    • RAM0.75 GB
    • Rear camera resolution5 MP
    • Rear camera typeSingle camera
    • Battery capacity1500 mAh
    • Weight123 g

    Specifications of SM-J105, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    J105BUBU0APC5 is Android 5.1.1 (Lollipop) firmware for Samsung Galaxy J1 Mini, released for 5 countries, 7 CSC codes. Samsung built it on 2016-03-23.

    No. A newer build for SM-J105B is available: J105BUBS0ASB1. Install it instead of J105BUBU0APC5 unless you need this exact version. The previous build was J105BDXU0APC4.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J1 Mini must be on bootloader binary 0 or lower.

    This build uses bootloader binary 0. It can be flashed on a Samsung Galaxy J1 Mini running binary 0 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 56 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy J1 Mini

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.
    Model firmware by region