Samsung Galaxy J1 Ace J110GDXU0APB1
SM-J110G 4 countries Android 4.4.4 (KitKat)

Samsung Galaxy J1 Ace J110GDXU0APB1 Firmware

Samsung Galaxy J1 Ace J110GDXU0APB1 is an Android 4.4.4 (KitKat) firmware for 4 countries, 7 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J110GDXU0AOK2, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-J110G is available: J110GDXU0AQJ1.

Download firmware
9.0/10 (477)30,248 times
Android 4.4.4 (KitKat)
OS Version
2016-07-15
First release
other regions until 2016-07-18
4
Countries
7
CSC codes
0
Bootloader binary

Bootloader binary 0. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    MODEM/CP Version: J110GDXU0APB1
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-J110G
    CAM Cambodia
    MM1, SIN, STH, XSP Singapore
    XME Malaysia
    		J110GOLB0APB1 2016-07-15 2016-07-15 550.965 MiB
    SM-J110G_1_20160715130553_vuxndr6dlu_fac.zip
    		Download
    SM-J110G
    XID Indonesia
    		J110GOLD0APB1 2016-07-18 2016-07-18 531.223 MiB
    SM-J110G_1_20160718180553_5pgq276rxz_fac.zip
    		Download

    No matching downloads

    How to flash J110GDXU0APB1

    • J110GDXU0APB1 has bootloader binary 0. Your device must run binary 0 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of J110GDXU0APB1 by region

    First release
    July 15, 2016
    Last region
    July 18, 2016
    Duration
    4 days
    Regions
    7
    1. Day 1 · · 6 regions
      CambodiaCAMMalaysiaXMESingaporeMM1SINSTHXSP
    2. Day 4 · · 1 region
      IndonesiaXID

    Device specifications

    • Display diagonal10.9 cm (4.3")
    • Display resolution480 x 800 pixels
    • Display typeSAMOLED
    • RAM0.75 GB
    • Rear camera resolution5 MP
    • Rear camera typeSingle camera
    • Battery capacity1900 mAh
    • Weight131 g

    Specifications of SM-J110, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    J110GDXU0APB1 is Android 4.4.4 (KitKat) firmware for Samsung Galaxy J1 Ace, released for 4 countries, 7 CSC codes. Samsung built it on 2016-07-15.

    No. A newer build for SM-J110G is available: J110GDXU0AQJ1. Install it instead of J110GDXU0APB1 unless you need this exact version. The previous build was J110GDXU0AOK2.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J1 Ace must be on bootloader binary 0 or lower.

    This build uses bootloader binary 0. It can be flashed on a Samsung Galaxy J1 Ace running binary 0 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 5 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy J1 Ace

    No changelog details available.
    Model firmware by region