SM-J110M 2 countries Android 5.1.1 (Lollipop)

Samsung Galaxy J1 Ace J110MUBS0ASA1 Firmware

Name: Samsung Galaxy J1 Ace (SM-J110M)
Brand: Samsung
Availability: InStock

Samsung Galaxy J1 Ace J110MUBS0ASA1 is an Android 5.1.1 (Lollipop) firmware for Chile (CHE, CHV), Colombia (COE). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J110MUBS0AQA2 https://samfirm.shop/build/J110MUBS0AQA2, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. This is the newest build for SM-J110M.

9.2/10 (451)13,197 times

Android 5.1.1 (Lollipop)

OS Version

n/a

Build Date

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 0. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

MODEM/CP Version: J110MUBU0APA1

Model	Region	CSC Version	Size	File name
SM-J110M	CHE Chile	J110MCHE0ASA1	—	—
SM-J110M	CHV Chile	J110MCHV0ASA1	—	—
SM-J110M	COE Colombia	J110MCOE0ASA1	—	—

Device specifications

Display diagonal10.9 cm (4.3")
Display resolution480 x 800 pixels
Display typeSAMOLED
RAM0.75 GB
Rear camera resolution5 MP
Rear camera typeSingle camera
Battery capacity1900 mAh
Weight131 g

Specifications of SM-J110, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

How to flash J110MUBS0ASA1

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

J110MUBS0ASA1 has bootloader binary 0. Your device must run binary 0 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

J110MUBS0ASA1 is Android 5.1.1 (Lollipop) firmware for Samsung Galaxy J1 Ace, released for Chile (CHE, CHV), Colombia (COE).

Yes. J110MUBS0ASA1 is the newest build for SM-J110M on SamFirm. The previous build was J110MUBS0AQA2.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J1 Ace must be on bootloader binary 0 or lower.

This build uses bootloader binary 0. It can be flashed on a Samsung Galaxy J1 Ace running binary 0 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 20 other builds of this model use the same binary, so you can switch between them in both directions.