SM-J200M 4 countries Android 5.1.1 (Lollipop)

Samsung Galaxy J2 J200MUBU1APF2 Firmware

Name: Samsung Galaxy J2 (SM-J200M)
Brand: Samsung
Availability: InStock

Samsung Galaxy J2 J200MUBU1APF2 is an Android 5.1.1 (Lollipop) firmware for 4 countries, 4 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J200MUBU1APF1 https://samfirm.shop/build/J200MUBU1APF1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-J200M is available: J200MUBS2ARK7 https://samfirm.shop/build/J200MUBS2ARK7.

9.4/10 (38)17,561 times

Android 5.1.1 (Lollipop)

OS Version

2016-06-14

First release

other regions until 2016-08-08

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy J2 use bootloader binary 2 (latest: J200MUBS2ARK7). If your device already runs binary 2, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

MODEM/CP Version: J200MUBU1APF2

Model	Region	CSC Version	Build Date	Release date	Size	File name
SM-J200M	ANC Argentina	J200MANC1APF2	2016-08-08	2016-08-08	983.413 MiB	SM-J200M_1_20160808140228_7ob0w64yg3_fac.zip
SM-J200M	ANC Argentina	J200M1APF2	2016-06-14	—	—	—
SM-J200M	CGU Guatemala	J200MUWM1APD3	2016-06-14	2016-07-25	1.046 GiB	SM-J200M_1_20181115100614_mxc60w32ab_fac.zip
SM-J200M	COM Colombia	J200MUWA1APG1	2016-06-14	2016-08-01	1.155 GiB	SM-J200M_1_20170515092013_78jqp45lnx_fac.zip
SM-J200M	ZTM Brazil	J200M1APF2	2016-06-14	—	—	—

Device specifications

Display diagonal11.9 cm (4.7")
Display resolution540 x 960 pixels
Display typeSAMOLED
RAM1 GB
Rear camera resolution5 MP
Rear camera typeSingle camera
Battery capacity2000 mAh
Weight130 g

Specifications of SM-J200, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

How to flash J200MUBU1APF2

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

J200MUBU1APF2 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

J200MUBU1APF2 is Android 5.1.1 (Lollipop) firmware for Samsung Galaxy J2, released for 4 countries, 4 CSC codes. Samsung built it on 2016-06-14.

No. A newer build for SM-J200M is available: J200MUBS2ARK7. Install it instead of J200MUBU1APF2 unless you need this exact version. The previous build was J200MUBU1APF1.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J2 must be on bootloader binary 1 or lower.

This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy J2 running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 11 other builds of this model use the same binary, so you can switch between them in both directions.