Samsung Galaxy J2 Core J260MUBSDAUJ2
SM-J260M 5 countries Android 8.1.0 (Oreo)

Samsung Galaxy J2 Core J260MUBSDAUJ2 Firmware

Samsung Galaxy J2 Core J260MUBSDAUJ2 is an Android 8.1.0 (Oreo) firmware for 5 countries, 5 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J260MUBSDAUJ1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-J260M is available: J260MUBSDAUJ4.

Download firmware
9.3/10 (466)22,086 times
Android 8.1.0 (Oreo)
OS Version
2021-11-10
First release
other regions until 2021-12-28
2021-10-01
Security patch
5
Countries
5
CSC codes
D (13)
Bootloader binary

Bootloader binary D (13). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    MODEM/CP Version: J260MUBSDAUJ2
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-J260M
    ALE Ecuador
    		J260MALEDATL1 2021-12-28 2021-12-28 750.938 MiB
    SM-J260M_1_20211101091102_xstrtx32af_fac.zip
    SM-J260M
    ANC Argentina
    		J260MANCDATL1 2021-11-16 2021-11-17 767.766 MiB
    SM-J260M_1_20211101091604_y1enfopihk_fac.zip
    SM-J260M
    CHV Chile
    		J260MCHVDATL1 2021-11-10 2021-11-10 773.674 MiB
    SM-J260M_1_20211101103241_ickjp55a56_fac.zip
    SM-J260M
    DOR Dominican Republic
    		J260MDORDATL1 2021-12-08 2021-12-08 747.409 MiB
    SM-J260M_1_20211101131137_7j550qmbd1_fac.zip
    SM-J260M
    JDI Jamaica
    		J260MJDIDATL1 2021-12-08 2021-12-08 758.926 MiB
    SM-J260M_1_20211101105750_t1b0b0yfj2_fac.zip

    No matching downloads

    How to flash J260MUBSDAUJ2

    • J260MUBSDAUJ2 has bootloader binary D (13). Your device must run binary D (13) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in J260MUBSDAUJ2

    • The security of your device has been improved.

    Rollout of J260MUBSDAUJ2 by region

    First release
    November 10, 2021
    Last region
    December 28, 2021
    Duration
    49 days
    Regions
    5
    1. Day 1 · · 1 region
      ChileCHV
    2. Day 8 · · 1 region
      ArgentinaANC
    3. Day 29 · · 2 regions
      Dominican RepublicDORJamaicaJDI
    4. Day 49 · · 1 region
      EcuadorALE

    Device specifications

    • Display diagonal12.7 cm (5")
    • Display resolution540 x 960 pixels
    • Display typePLS
    • Processor frequency1.4 GHz
    • Processor familySamsung Exynos
    • Processor model7570
    • RAM1 GB
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • SIM cardsDual SIM
    • Battery capacity2600 mAh
    • Weight154 g

    Frequently Asked Questions

    J260MUBSDAUJ2 is Android 8.1.0 (Oreo) firmware for Samsung Galaxy J2 Core, released for 5 countries, 5 CSC codes. It includes the 2021-10-01 security patch. Samsung built it on 2021-11-10.

    No. A newer build for SM-J260M is available: J260MUBSDAUJ4. Install it instead of J260MUBSDAUJ2 unless you need this exact version. The previous build was J260MUBSDAUJ1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J2 Core must be on bootloader binary D (13) or lower.

    This build uses bootloader binary D (13). It can be flashed on a Samsung Galaxy J2 Core running binary D (13) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 25 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy J2 Core

    • The security of your device has been improved.

    • Overall stability of your device has been improved.

    · The security of your device has been improved.

    • LGPD (General Personal Data Protection Law) has been applied.
    • The security of your device has been improved.

    • The security of your device has been improved.

    Model firmware by region