Samsung Galaxy J2 Core J260MUUBS1ATE6
SM-J260MU 3 countries Android 8.1.0 (Oreo)

Samsung Galaxy J2 Core J260MUUBS1ATE6 Firmware

Samsung Galaxy J2 Core J260MUUBS1ATE6 is an Android 8.1.0 (Oreo) firmware for Argentina (PSN, UFN), Guatemala (CGU), Paraguay (TGP). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J260MUUBS1ATE5, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-J260MU is available: J260MUUBS1AVL1.

Download firmware
9.1/10 (39)17,451 times
Android 8.1.0 (Oreo)
OS Version
2020-05-12
First release
other regions until 2020-05-13
2020-05-01
Security patch
3
Countries
4
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-J260MU
    CGU Guatemala
    		J260MUOWM1ATB4J260MUUBS1ATE3 2020-05-13 2020-06-18 969.921 MiB
    SM-J260MU_1_20200513135041_ldj1oexysk_fac.zip
    SM-J260MU
    CGU Guatemala
    		J260MUOWM1ATB4J260MUUBS1ATE6 2020-05-12 2020-06-25 — —
    SM-J260MU
    PSN Argentina
    		J260MUOWB1ATE1J260MUUBS1ATE3 2020-05-13 2020-06-03 957.842 MiB
    SM-J260MU_1_20200513145855_d26z6c7gdf_fac.zip
    SM-J260MU
    PSN Argentina
    		J260MUOWB1ATE1J260MUUBS1ATE6 2020-05-12 2020-06-03 — —
    SM-J260MU
    TGP Paraguay
    		J260MUOWM1ATB3J260MUUBS1ATE3 2020-05-13 2020-05-27 991.77 MiB
    SM-J260MU_1_20210216132035_up5q7pz4bt_fac.zip
    SM-J260MU
    UFN Argentina
    		J260MUOWT1ATB1J260MUUBS1ATE3 2020-05-13 2020-05-26 941.722 MiB
    SM-J260MU_1_20210216115034_7o5trbq7nl_fac.zip

    No matching downloads

    How to flash J260MUUBS1ATE6

    • J260MUUBS1ATE6 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in J260MUUBS1ATE6

    · The security of your device has been improved.

    Rollout of J260MUUBS1ATE6 by region

    First release
    May 26, 2020
    Last region
    June 18, 2020
    Duration
    24 days
    Regions
    4
    1. Day 1 · · 1 region
      ArgentinaUFN
    2. Day 2 · · 1 region
      ParaguayTGP
    3. Day 9 · · 1 region
      ArgentinaPSN
    4. Day 24 · · 1 region
      GuatemalaCGU

    Device specifications

    • Display diagonal12.7 cm (5")
    • Display resolution540 x 960 pixels
    • Display typePLS
    • RAM1 GB
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • Battery capacity2600 mAh
    • Weight154 g

    Specifications of SM-J260M, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    J260MUUBS1ATE6 is Android 8.1.0 (Oreo) firmware for Samsung Galaxy J2 Core, released for Argentina (PSN, UFN), Guatemala (CGU), Paraguay (TGP). It includes the 2020-05-01 security patch. Samsung built it on 2020-05-12.

    No. A newer build for SM-J260MU is available: J260MUUBS1AVL1. Install it instead of J260MUUBS1ATE6 unless you need this exact version. The previous build was J260MUUBS1ATE5.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J2 Core must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy J2 Core running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 21 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy J2 Core

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    • The security of your device has been improved.

    · The security of your device has been improved.

    • The security of your device has been improved.

    · The security of your device has been improved.

    Show 3 older builds

    • The security of your device has been improved.

    · The security of your device has been improved.

    No changelog details available.
    Model firmware by region