Samsung Galaxy J3(2016) J320FNXXU0APC8
SM-J320FN 16 countries Android 5.1.1 (Lollipop)

Samsung Galaxy J3(2016) J320FNXXU0APC8 Firmware

Samsung Galaxy J3(2016) J320FNXXU0APC8 is an Android 5.1.1 (Lollipop) firmware for 16 countries, 21 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J320FNXXU0APC6, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-J320FN is available: J320FNXXU0ASH1.

9.1/10 (451)90,641 times
Android 5.1.1 (Lollipop)
OS Version
2016-03-16
Build Date
n/a
Security patch
16
Countries
21
CSC codes
0
Bootloader binary

Bootloader binary 0. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    21
    MODEM/CP Version: J320FNXXU0APC8
    ModelRegionCSC VersionSizeFile nameDownload
    SM-J320FN
    ATL Spain
    		J320FNVFR0APC2 — —
    SM-J320FN
    COS Greece
    		J320FN0APD1 — —
    SM-J320FN
    CYV Cyprus
    		J320FNVFG0APC2 — —
    SM-J320FN
    DDE Germany
    		J320FNDDX0APD1 — —
    SM-J320FN
    DPL Poland
    		J320FNDPX0APD1 — —
    SM-J320FN
    DTM Germany
    		J320FNDDX0APD1 — —
    SM-J320FN
    MBM Macedonia
    		J320FN0APD1 — —
    SM-J320FN
    O2U United Kingdom
    		J320FN0APD6 — —
    SM-J320FN
    OMN Italy
    		J320FNVFR0APC2 — —
    SM-J320FN
    TCL Portugal
    		J320FNVFR0APC2 — —
    SM-J320FN
    TMH Hungary
    		J320FN0APD1 — —
    SM-J320FN
    TMS Slovakia
    		J320FN0APD1 — —
    SM-J320FN
    TMZ Czechia
    		J320FN0APD1 — —
    SM-J320FN
    TOP Montenegro
    		J320FNVFG0APC2 — —
    SM-J320FN
    TPL Poland
    		J320FNDPX0APD1 — —
    SM-J320FN
    VDC Czechia
    		J320FNVFG0APC2 — —
    SM-J320FN
    VDI Ireland
    		J320FNVFR0APC2 — —
    SM-J320FN
    VGR Greece
    		J320FNVFR0APC2 — —
    SM-J320FN
    VIP Croatia
    		J320FNVFG0APC2 — —
    SM-J320FN
    XFA South Africa
    		J320FNOJV0APC1 — —
    SM-J320FN
    XFV South Africa
    		J320FNVFR0APC2 — —

    No matching downloads

    Device specifications

    • Display diagonal12.7 cm (5")
    • Display resolution1280 x 720 pixels
    • Display typeSAMOLED
    • RAM1.5 GB
    • RAM typeLPDDR3
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • Battery capacity2600 mAh
    • Weight138 g

    Specifications of SM-J320F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    How to flash J320FNXXU0APC8

    • J320FNXXU0APC8 has bootloader binary 0. Your device must run binary 0 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Frequently Asked Questions

    J320FNXXU0APC8 is Android 5.1.1 (Lollipop) firmware for Samsung Galaxy J3(2016), released for 16 countries, 21 CSC codes. Samsung built it on 2016-03-16.

    No. A newer build for SM-J320FN is available: J320FNXXU0ASH1. Install it instead of J320FNXXU0APC8 unless you need this exact version. The previous build was J320FNXXU0APC6.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J3(2016) must be on bootloader binary 0 or lower.

    This build uses bootloader binary 0. It can be flashed on a Samsung Galaxy J3(2016) running binary 0 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 46 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy J3(2016)

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    · Battery usage optimization

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.
    · Battery usage optimization
    Show 15 older builds
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    Model firmware by region