Samsung Galaxy J3 J320VPPVRU1APC3_PC9 Firmware
Samsung Galaxy J3 J320VPPVRU1APC3_PC9 is an Android 6.0.1 firmware for United States (VZW). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. A newer build for SM-J320VPP is available: J320VPPVRU2ARA2 https://samfirm.shop/build/J320VPPVRU2ARA2.
Android 6.0.1
OS Version
1
Countries
1
CSC codes
3
Bootloader binary
Bootloader binary 3. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.
All regional downloads
Pick your region (CSC) to download the matching firmware package.
Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
MODEM/CP Version: J320VPPVRU1APC3_PC9
| Model | Region | CSC Version | Size | File name | Download |
|---|---|---|---|---|---|
| SM-J320VPP |
VZW United States | J320VPPVZW1APC3_PC9 | — | — | Download |
No matching downloads
How to flash J320VPPVRU1APC3_PC9
- J320VPPVRU1APC3_PC9 has bootloader binary 3. Your device must run binary 3 or lower: it is the 5th character from the end of your current build number.
- CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
- HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
- The Download Mode key combo depends on the model: see all combos.
Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.
Device specifications
- Display diagonal12.7 cm (5")
- Display resolution1280 x 720 pixels
- Display typeSAMOLED
- RAM1.5 GB
- RAM typeLPDDR3
- Rear camera resolution8 MP
- Rear camera typeSingle camera
- Battery capacity2600 mAh
- Weight138 g
Specifications of SM-J320F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.
Frequently Asked Questions
J320VPPVRU1APC3_PC9 is Android 6.0.1 firmware for Samsung Galaxy J3, released for United States (VZW).
No. A newer build for SM-J320VPP is available: J320VPPVRU2ARA2. Install it instead of J320VPPVRU1APC3_PC9 unless you need this exact version.
Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J3 must be on bootloader binary 3 or lower.
This build uses bootloader binary 3. It can be flashed on a Samsung Galaxy J3 running binary 3 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". No other build of this model uses binary 3.
Other builds and changelog for Samsung Galaxy J3
No changelog details available.
- J320VPPVRU2ARA2Jan 10, 2018
- J320VPPVRS2AQI1Sep 7, 2017
- J320VPPVRU1APC3_PC9