Samsung Galaxy J4 Core J410GUBS1AVK2
SM-J410G 1 country Android 8.1.0 (Oreo)

Samsung Galaxy J4 Core J410GUBS1AVK2 Firmware

Samsung Galaxy J4 Core J410GUBS1AVK2 is an Android 8.1.0 (Oreo) firmware for Brazil (ZTA, ZTM, ZTO, ZTR, ZVV). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J410GUBS1AVK1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-J410G is available: J410GUBU1AZB2.

Download firmware
8.9/10 (467)22,294 times
Android 8.1.0 (Oreo)
OS Version
2022-12-16
Build Date
2020-12-01
Security patch
1
Countries
5
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: J410GUBU1ATI1
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-J410G
    ZTA Brazil
    		J410GZTA1ATI3 2022-12-16 2022-12-16 951.894 MiB
    SM-J410G_1_20221104090321_ds6mrn9wc8_fac.zip
    		Download
    SM-J410G
    ZTM Brazil
    		J410GZTM1ATI4 2022-12-16 2022-12-16 928.73 MiB
    SM-J410G_1_20221104090431_7b3hh5dpyr_fac.zip
    		Download
    SM-J410G
    ZTO Brazil
    		J410GOWO1ATI4 2022-12-16 2022-12-16 902.79 MiB
    SM-J410G_1_20221104085731_sybul67zt1_fac.zip
    		Download
    SM-J410G
    ZTR Brazil
    		J410GZTR1ATL3 2022-12-16 2022-12-16 902.246 MiB
    SM-J410G_1_20221104090521_wnnn0k5sh5_fac.zip
    		Download
    SM-J410G
    ZVV Brazil
    		J410GZVV1ATI3 2022-12-16 2022-12-16 940.31 MiB
    SM-J410G_1_20221104090621_vv4sn7b5ux_fac.zip
    		Download

    No matching downloads

    How to flash J410GUBS1AVK2

    • J410GUBS1AVK2 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in J410GUBS1AVK2

    · The security of your device has been improved.

    Rollout of J410GUBS1AVK2 by region

    Samsung released this build in all regions (5) on the same day, December 16, 2022.

    Device specifications

    • Launched withAndroid 8.1
    • Display diagonal15.2 cm (6")
    • Display resolution1480 x 720 pixels
    • Display typeTFT
    • RAM1 GB
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • Battery capacity3300 mAh
    • Weight177 g

    Specifications of SM-J410F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    J410GUBS1AVK2 is Android 8.1.0 (Oreo) firmware for Samsung Galaxy J4 Core, released for Brazil (ZTA, ZTM, ZTO, ZTR, ZVV). It includes the 2020-12-01 security patch. Samsung built it on 2022-12-16.

    No. A newer build for SM-J410G is available: J410GUBU1AZB2. Install it instead of J410GUBS1AVK2 unless you need this exact version. The previous build was J410GUBS1AVK1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J4 Core must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy J4 Core running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 96 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy J4 Core

    • Stability and reliability
    Device behavior has been improved.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    · The security of your device has been improved.

    • The security of your device has been improved.

    · The security of your device has been improved.

    Model firmware by region