Samsung Galaxy J4+ J415GUBS6BTI2
SM-J415G 12 countries Android 9 (Pie)

Samsung Galaxy J4+ J415GUBS6BTI2 Firmware

Samsung Galaxy J4+ J415GUBS6BTI2 is an Android 9 (Pie) firmware for 12 countries, 15 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J415GUBS6BTI1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-J415G is available: J415GUBU6BZB2.

Download firmware
9.0/10 (456)65,021 times
Android 9 (Pie)
OS Version
2020-10-17
Build Date
2020-10-01
Security patch
12
Countries
15
CSC codes
6
Bootloader binary

Bootloader binary 6. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    15
    MODEM/CP Version: J415GUBU6BTG1
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-J415G
    ARO Argentina
    		J415GOWO6BTG1 — — — —
    SM-J415G
    BVO Bolivia
    		J415GOWO6BTG1 — — — —
    SM-J415G
    CHO Chile
    		J415GOWO6BTG1 — — — —
    SM-J415G
    CHP Chile
    		J415GOWO6BTG1 — — — —
    SM-J415G
    CHQ Chile
    		J415GOWO6BTG1 — — — —
    SM-J415G
    COO Colombia
    		J415GOWO6BTG1 — — — —
    SM-J415G
    DOO Dominican Republic
    		J415GOWO6BTG1 — — — —
    SM-J415G
    EON Trinidad & Tobago
    		J415GOWO6BTG1 — — — —
    SM-J415G
    GTO Guatemala
    		J415GOWO6BTG1 — — — —
    SM-J415G
    MXO Mexico
    		J415GOWO6BTG1 — — — —
    SM-J415G
    PEO Peru
    		J415GOWO6BTG1 — — — —
    SM-J415G
    TPA Panama
    		J415GOWO6BTG1 — — — —
    SM-J415G
    UPO Uruguay
    		J415GOWO6BTG1 — — — —
    SM-J415G
    UYO Uruguay
    		J415GOWO6BTG1 — — — —
    SM-J415G
    ZTO Brazil
    		J415GOWO6BTG1 2020-10-17 2020-10-17 2.398 GiB
    SM-J415G_1_20201009210704_evihvbqkw4_fac.zip

    No matching downloads

    How to flash J415GUBS6BTI2

    • J415GUBS6BTI2 has bootloader binary 6. Your device must run binary 6 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in J415GUBS6BTI2

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    Rollout of J415GUBS6BTI2 by region

    Samsung released this build in all regions (1) on the same day, October 17, 2020.

    Device specifications

    • Launched withAndroid 8.1
    • Display diagonal15.2 cm (6")
    • Display resolution720 x 1480 pixels
    • Display typeTFT
    • RAM2 GB
    • Rear camera resolution13 MP
    • Rear camera typeSingle camera
    • Battery capacity3300 mAh
    • Weight178 g

    Specifications of SM-J415F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    J415GUBS6BTI2 is Android 9 (Pie) firmware for Samsung Galaxy J4+, released for 12 countries, 15 CSC codes. It includes the 2020-10-01 security patch. Samsung built it on 2020-10-17.

    No. A newer build for SM-J415G is available: J415GUBU6BZB2. Install it instead of J415GUBS6BTI2 unless you need this exact version. The previous build was J415GUBS6BTI1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.398 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy J4+ must be on bootloader binary 6 or lower.

    This build uses bootloader binary 6. It can be flashed on a Samsung Galaxy J4+ running binary 6 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 20 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy J4+

    • Stability and reliability
    Device behavior has been improved.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    · Security patch update

    • The security of your device has been improved.

    • LGPD (General Personal Data Protection Law) has been applied.
    • The security of your device has been improved.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    Show 4 older builds
    No changelog details available.

    • The security of your device has been improved.

    • Added new feature. - Samsung Pay mini
    • The security of your device has been improved.

    Model firmware by region