Samsung Galaxy J5 J500FNXXU1BPI1
SM-J500FN 6 countries Android 6.0.1 (Marshmallow)

Samsung Galaxy J5 J500FNXXU1BPI1 Firmware

Samsung Galaxy J5 J500FNXXU1BPI1 is an Android 6.0.1 (Marshmallow) firmware for 6 countries, 10 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J500FNXXU1BPH3: Android updated from Android 6.0.1 (Lollipop) to Android 6.0.1 (Marshmallow). A newer build for SM-J500FN is available: J500FNXXU1BSF1.

Download firmware
9.3/10 (459)43,724 times
Android 6.0.1 (Marshmallow)
OS Version
2016-09-13
Build Date
6
Countries
10
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    10
    MODEM/CP Version: J500FNXXU1BPI1
    ModelRegionCSC VersionSizeFile nameDownload
    SM-J500FN
    COS Greece
    		J500FN1BPI2 — — Download
    SM-J500FN
    DDE Germany
    		J500FNDDX1BPI2 — — Download
    SM-J500FN
    DPL Poland
    		J500FNDPX1BPI2 — — Download
    SM-J500FN
    DTM Germany
    		J500FNDDX1BPI2 — — Download
    SM-J500FN
    MAX Austria
    		J500FNDAX1BPI2 — — Download
    SM-J500FN
    MBM Macedonia
    		J500FN1BPI2 — — Download
    SM-J500FN
    TMZ Czechia
    		J500FN1BPI2 — — Download
    SM-J500FN
    TPL Poland
    		J500FNDPX1BPI2 — — Download
    SM-J500FN
    TRG Austria
    		J500FNDAX1BPI2 — — Download
    SM-J500FN
    TTR Austria
    		J500FNDAX1BPI2 — — Download

    No matching downloads

    How to flash J500FNXXU1BPI1

    • J500FNXXU1BPI1 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Display diagonal12.7 cm (5")
    • Display resolution1280 x 720 pixels
    • Display typeSAMOLED
    • Processor frequency1.2 GHz
    • RAM1.5 GB
    • Rear camera resolution13 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity2600 mAh
    • Weight146 g

    Frequently Asked Questions

    J500FNXXU1BPI1 is Android 6.0.1 (Marshmallow) firmware for Samsung Galaxy J5, released for 6 countries, 10 CSC codes. Samsung built it on 2016-09-13.

    No. A newer build for SM-J500FN is available: J500FNXXU1BSF1. Install it instead of J500FNXXU1BPI1 unless you need this exact version. The previous build was J500FNXXU1BPH3.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J5 must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy J5 running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 53 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy J5

    · The security of your device has been improved.

    ※ If your device is encrypted, it must be decrypted before upgrading.

    No changelog details available.

    · The security of your device has been improved.
    · A new WhatsApp function has been added - Move to SD card
    · Battery usage optimization

    No changelog details available.
    Model firmware by region