Samsung Galaxy J5 Pro J530GUBU2ARB1
SM-J530G 8 countries Android 7.0 (Pie)

Samsung Galaxy J5 Pro J530GUBU2ARB1 Firmware

Samsung Galaxy J5 Pro J530GUBU2ARB1 is an Android 7.0 (Pie) firmware for 8 countries, 10 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J530GUBU1AQK1: Android updated from Android 7.0 (Nougat) to Android 7.0 (Pie); bootloader binary raised from 1 to 2, so after installing it there is no way back to older builds. A newer build for SM-J530G is available: J530GUBS9CUG3.

Download firmware
8.9/10 (454)43,474 times
Android 7.0 (Pie)
OS Version
2018-02-02
Build Date
8
Countries
10
CSC codes
2
Bootloader binary

Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy J5 Pro use bootloader binary 9 (latest: J530GUBS9CUG3). If your device already runs binary 9, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    2
    MODEM/CP Version: J530GUBU2ARB1
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-J530G
    BVO Bolivia
    COO Colombia
    DOO Dominican Republic
    EON, TTT Trinidad & Tobago
    +2 more countries
    TPA Panama
    UPO, UYO Uruguay
    		J530GUUB2ARB1 2018-02-28 2.351 GiB
    SM-J530G_1_20210806065205_er8a2vn3f3_fac.zip
    MD5:d69840159e11e900ddeb8481eed6ec23
    SHA1:46061b558d9509ecfe5a162e93922bb603dfac53
    		Download
    SM-J530G
    CRM Costa Rica
    NBS Nicaragua
    		J530GUWT2ARB1 2018-04-17 2.467 GiB
    SM-J530G_1_20210806064234_nu437tbwsz_fac.zip
    		Download

    No matching downloads

    How to flash J530GUBU2ARB1

    • J530GUBU2ARB1 has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of J530GUBU2ARB1 by region

    First release
    February 28, 2018
    Last region
    May 23, 2018
    Duration
    85 days
    Regions
    10
    1. Day 1 · · 5 regions
      ColombiaCOODominican RepublicDOOTrinidad & TobagoEONTTTUruguayUYO
    2. Day 8 · · 1 region
      PanamaTPA
    3. Day 23 · · 1 region
      BoliviaBVO
    4. Day 27 · · 1 region
      UruguayUPO
    5. Day 49 · · 1 region
      NicaraguaNBS
    6. Day 85 · · 1 region
      Costa RicaCRM

    Device specifications

    • Display diagonal13.2 cm (5.2")
    • Display resolution1280 x 720 pixels
    • Processor frequency1.6 GHz
    • RAM2 GB
    • Rear camera resolution13 MP
    • Rear camera typeSingle camera
    • SIM cardsDual SIM
    • Battery capacity3000 mAh
    • Weight160 g

    Frequently Asked Questions

    J530GUBU2ARB1 is Android 7.0 (Pie) firmware for Samsung Galaxy J5 Pro, released for 8 countries, 10 CSC codes. Samsung built it on 2018-02-02.

    No. A newer build for SM-J530G is available: J530GUBS9CUG3. Install it instead of J530GUBU2ARB1 unless you need this exact version. The previous build was J530GUBU1AQK1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J5 Pro must be on bootloader binary 2 or lower.

    This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy J5 Pro running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 1 other build of this model uses the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy J5 Pro

    No changelog details available.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.
    Model firmware by region