Samsung Galaxy J5 Pro J530YMDXU5CSH8
SM-J530YM 1 country Android 9 (Pie)

Samsung Galaxy J5 Pro J530YMDXU5CSH8 Firmware

Samsung Galaxy J5 Pro J530YMDXU5CSH8 is an Android 9 (Pie) firmware for Thailand (THL). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J530YMDXS5BSG1: Android updated from Android 8.1.0 (Pie) to Android 9 (Pie). A newer build for SM-J530YM is available: J530YMDXS7CUD1.

Download firmware
8.8/10 (477)4,360 times
Android 9 (Pie)
OS Version
2019-08-22
Build Date
1
Countries
1
CSC codes
5
Bootloader binary

Bootloader binary 5. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy J5 Pro use bootloader binary 7 (latest: J530YMDXS7CUD1). If your device already runs binary 7, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: J530YMDXU5CSH7
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-J530YM
    THL Thailand
    		J530YMOLD5CSH8 2019-09-05 2.37 GiB
    SM-J530YM_1_20210426161236_5lap06lhq5_fac.zip
    		Download

    No matching downloads

    How to flash J530YMDXU5CSH8

    • J530YMDXU5CSH8 has bootloader binary 5. Your device must run binary 5 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Launched withAndroid 7.0
    • Display diagonal13.2 cm (5.2")
    • Display resolution720 x 1280 pixels
    • Display typeSAMOLED
    • RAM3 GB
    • Rear camera resolution13 MP
    • Rear camera typeSingle camera
    • Battery capacity3000 mAh
    • Weight160 g

    Specifications of SM-J530Y/DS, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    J530YMDXU5CSH8 is Android 9 (Pie) firmware for Samsung Galaxy J5 Pro, released for Thailand (THL). Samsung built it on 2019-08-22.

    No. A newer build for SM-J530YM is available: J530YMDXS7CUD1. Install it instead of J530YMDXU5CSH8 unless you need this exact version. The previous build was J530YMDXS5BSG1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.37 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy J5 Pro must be on bootloader binary 5 or lower.

    This build uses bootloader binary 5. It can be flashed on a Samsung Galaxy J5 Pro running binary 5 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 5 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy J5 Pro

    No changelog details available.

    · A new Camera function has been added : Selfie focus, Stamp, Skin Tone, AR sticker

    No changelog details available.
    Model firmware by region