SM-J701M 9 countries Android 9 (Pie)

Samsung Galaxy J7 Neo J701MUBSBCUD1 Firmware

Name: Samsung Galaxy J7 Neo (SM-J701M)
Brand: Samsung
Availability: InStock

Samsung Galaxy J7 Neo J701MUBSBCUD1 is an Android 9 (Pie) firmware for 9 countries, 13 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J701MUBSACUB1 https://samfirm.shop/build/J701MUBSACUB1: bootloader binary raised from A (10) to B (11), so after installing it there is no way back to older builds. A newer build for SM-J701M is available: J701MUBUBCZC2 https://samfirm.shop/build/J701MUBUBCZC2.

9.0/10 (484)56,332 times

Android 9 (Pie)

OS Version

2021-05-19

Build Date

n/a

Security patch

Countries

CSC codes

B (11)

Bootloader binary

Bootloader binary B (11). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

MODEM/CP Version: J701MUBSBCUD1

Model	Region	CSC Version	Release date	Size	File name	Download
SM-J701M	ARO Argentina BVO Bolivia CHK, CHO, CHQ Chile COO Colombia +5 more countries DOO Dominican Republic EON, TTT Trinidad & Tobago MXO Mexico TPA Panama UPO, UYO Uruguay	J701MUUBBCUD1	2021-05-19	2.269 GiB	SM-J701M_1_20210512004650_ovhj3ue2iz_fac.zip

Device specifications

Launched withAndroid 7.0
Display diagonal14 cm (5.5")
Display resolution720 x 1280 pixels
Display typeSAMOLED
Processor frequency1.6 GHz
Processor familySamsung Exynos
Processor model7870
RAM2 GB
Rear camera resolution13 MP
Rear camera typeSingle camera
SIM cardsSingle SIM
Battery capacity3000 mAh
Weight170 g

How to flash J701MUBSBCUD1

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

J701MUBSBCUD1 has bootloader binary B (11). Your device must run binary B (11) or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

J701MUBSBCUD1 is Android 9 (Pie) firmware for Samsung Galaxy J7 Neo, released for 9 countries, 13 CSC codes. Samsung built it on 2021-05-19.

No. A newer build for SM-J701M is available: J701MUBUBCZC2. Install it instead of J701MUBSBCUD1 unless you need this exact version. The previous build was J701MUBSACUB1.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.269 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy J7 Neo must be on bootloader binary B (11) or lower.

This build uses bootloader binary B (11). It can be flashed on a Samsung Galaxy J7 Neo running binary B (11) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 8 other builds of this model use the same binary, so you can switch between them in both directions.