Samsung Galaxy Wide2 J727SKSU5CUD2
SM-J727S 1 country Android 9 (Pie)

Samsung Galaxy Wide2 J727SKSU5CUD2 Firmware

Build Date:

Samsung Galaxy Wide2 J727SKSU5CUD2 is an Android 9 (Pie) firmware for South Korea (SKC). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J727SKSU5CTD1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. This is the newest build for SM-J727S.

Download firmware
9.1 (469)4,464 times
Android 9 (Pie)
OS Version
2021-05-03
Build Date
1
Countries
1
CSC codes
5
Bootloader binary

Bootloader binary 5. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: J727SKSU5CUD2
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-J727S
    SKC South Korea
    		J727SSKC5CUD2 2021-05-03 2.573 GiB
    SM-J727S_1_20210409133536_et74axrd4o_fac.zip
    File on Samsung server:SM-J727S_1_20210409133536_et74axrd4o_fac.zip.enc4
    Size: 2.57 GiB (2,762,988,704 B)
    CRC32 (Samsung FUS):24522371
    Package contents:
    • BL_J727SKSU5CUD2_CL21449011_QB39420277_REV01_user_low_ship.tar.md5
    • AP_J727SKSU5CUD2_CL21449011_QB39420277_REV01_user_low_ship_meta_OS9.tar.md5
    • CP_J727SKSU5CUD2_CP18795090_CL21449011_QB39420277_REV01_user_low_ship.tar.md5
    • CSC_SKC_J727SSKC5CUD2_CL21449011_QB39420277_REV01_user_low_ship.tar.md5
    • HOME_CSC_SKC_J727SSKC5CUD2_CL21449011_QB39420277_REV01_user_low_ship.tar.md5
    		Download

    No matching downloads

    How to flash J727SKSU5CUD2

    • J727SKSU5CUD2 has bootloader binary 5. Your device must run binary 5 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Display diagonal14 cm (5.5")
    • Display resolution1280 x 720 pixels
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • Battery capacity3300 mAh
    • Weight169.8 g

    Specifications of SM-J727U, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    J727SKSU5CUD2 is Android 9 (Pie) firmware for Samsung Galaxy Wide2, released for South Korea (SKC). Samsung built it on 2021-05-03.

    Yes. J727SKSU5CUD2 is the newest build for SM-J727S on SamFirm. The previous build was J727SKSU5CTD1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.573 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Wide2 must be on bootloader binary 5 or lower.

    This build uses bootloader binary 5. It can be flashed on a Samsung Galaxy Wide2 running binary 5 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 1 other build of this model uses the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Wide2

    No changelog details available.
    Model firmware by region

    New firmware for other devices

    All latest builds