SM-J730GM 1 country Android 9 (Pie)

Samsung Galaxy J7 Pro J730GMUBSCCTL2 Firmware

Name: Samsung Galaxy J7 Pro (SM-J730GM)
Brand: Samsung
Availability: InStock

Samsung Galaxy J7 Pro J730GMUBSCCTL2 is an Android 9 (Pie) firmware for Mexico (MXO). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J730GMDXUBCTI3 https://samfirm.shop/build/J730GMDXUBCTI3: bootloader binary raised from B (11) to C (12), so after installing it there is no way back to older builds. A newer build for SM-J730GM is available: J730GMDXUCCZC2 https://samfirm.shop/build/J730GMDXUCCZC2.

Download firmware 8.7/10 (484)4,344 times

Android 9 (Pie)

OS Version

2020-12-29

Build Date

Countries

CSC codes

C (12)

Bootloader binary

Bootloader binary C (12). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

MODEM/CP Version: J730GMUBSCCTL2

Model	Region	CSC Version	Release date	Size	File name	Download
SM-J730GM	MXO Mexico	J730GMUUBCCTL1	2020-12-29	1.796 GiB	SM-J730GM_1_20201218212634_nnqgl1j0x6_fac.zip	Download

How to flash J730GMUBSCCTL2

J730GMUBSCCTL2 has bootloader binary C (12). Your device must run binary C (12) or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Device specifications

Display diagonal14 cm (5.5")
Display resolution1920 x 1080 pixels
Display typeSAMOLED
RAM3 GB
Rear camera resolution13 MP
Rear camera typeSingle camera
Battery capacity3600 mAh
Weight181 g

Specifications of SM-J730G, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

Frequently Asked Questions

J730GMUBSCCTL2 is Android 9 (Pie) firmware for Samsung Galaxy J7 Pro, released for Mexico (MXO). Samsung built it on 2020-12-29.

No. A newer build for SM-J730GM is available: J730GMDXUCCZC2. Install it instead of J730GMUBSCCTL2 unless you need this exact version. The previous build was J730GMDXUBCTI3.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.796 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy J7 Pro must be on bootloader binary C (12) or lower.

This build uses bootloader binary C (12). It can be flashed on a Samsung Galaxy J7 Pro running binary C (12) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 13 other builds of this model use the same binary, so you can switch between them in both directions.