Samsung Galaxy M10 M105GDXS3BSK2

Samsung Galaxy M10 M105GDXS3BSK2 Firmware

Samsung Galaxy M10 M105GDXS3BSK2 is an Android 9 (Pie) firmware for 7 countries, 7 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build M105GDXU2BSK1 https://samfirm.shop/build/M105GDXU2BSK1: bootloader binary raised from 2 to 3, so after installing it there is no way back to older builds; security patch 2019-11-01 instead of 2019-10-01. A newer build for SM-M105G is available: M105GDXSACWA1 https://samfirm.shop/build/M105GDXSACWA1.

Download firmware
9.0/10 (474)29,787 times
Android 9 (Pie)
OS Version
2019-11-21
First release
other regions until 2019-12-02
2019-11-01
Security patch
7
Countries
7
CSC codes
3
Bootloader binary

Bootloader binary 3. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy M10 use bootloader binary A (10) (latest: M105GDXSACWA1 https://samfirm.shop/build/M105GDXSACWA1). If your device already runs binary A (10), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: M105GDXS3BSK2
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-M105G
    EGY Egypt
    KSA Saudi Arabia
    LYS Libya
    MID Iraq
    +3 more countries
    MWD Morocco
    TUR Turkey
    XSG United Arab Emirates
    M105GOJM3BSK2 2019-12-13 2.239 GiB
    SM-M105G_1_20200608182003_fopt5d91k4_fac.zip

    No matching downloads

    How to flash M105GDXS3BSK2

    • M105GDXS3BSK2 has bootloader binary 3. Your device must run binary 3 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in M105GDXS3BSK2

    · The security of your device has been improved.

    Rollout of M105GDXS3BSK2 by region

    First release
    December 13, 2019
    Last region
    December 17, 2019
    Duration
    5 days
    Regions
    7
    1. Day 1 · · 6 regions
      EgyptEGYIraqMIDLibyaLYSMoroccoMWDSaudi ArabiaKSAUnited Arab EmiratesXSG
    2. Day 5 · · 1 region
      TurkeyTUR

    Device specifications

    • Display diagonal15.8 cm (6.2")
    • Display resolution720 x 1520 pixels
    • Display typeTFT
    • RAM2 GB
    • Rear camera resolution13 MP
    • Rear camera typeDual camera
    • Battery capacity3400 mAh
    • Weight163 g

    Specifications of SM-M105, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    M105GDXS3BSK2 is Android 9 (Pie) firmware for Samsung Galaxy M10, released for 7 countries, 7 CSC codes. It includes the 2019-11-01 security patch. Samsung built it on 2019-11-21.

    No. A newer build for SM-M105G is available: M105GDXSACWA1. Install it instead of M105GDXS3BSK2 unless you need this exact version. The previous build was M105GDXU2BSK1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.239 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy M10 must be on bootloader binary 3 or lower.

    This build uses bootloader binary 3. It can be flashed on a Samsung Galaxy M10 running binary 3 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". No other build of this model uses binary 3.

    Other builds and changelog for Samsung Galaxy M10

    https://samfirm.shop/build/M105GDXSACWA1

    • The security of your device has been improved.

    • An emergency alert (Emergency Cell Broadcast) feature has been added in Ukraine.

    https://samfirm.shop/build/M105GDXS9CVD1

    • The security of your device has been improved.

    · The security of your device has been improved.

    • The security of your device has been improved.

    Show 2 older builds
    · Security patch update

    • The security of your device has been improved.