Samsung GT-N5100 N5100XWCNA1
GT-N5100 8 countries Android 4.4.2 (KitKat)

Samsung GT-N5100 N5100XWCNA1 Firmware

Samsung GT-N5100 N5100XWCNA1 is an Android 4.4.2 (KitKat) firmware for 8 countries, 9 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build N5100ZTCNL6: bootloader binary raised from T (29) to W (32), so after installing it there is no way back to older builds. A newer build for GT-N5100 is available: N5100XXDNL5.

Download firmware
8.9/10 (479)39,067 times
Android 4.4.2 (KitKat)
OS Version
2014-01-10
Build Date
8
Countries
9
CSC codes
W (32)
Bootloader binary

Bootloader binary W (32). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung GT-N5100 use bootloader binary X (33) (latest: N5100XXDNL5). If your device already runs binary X (33), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    2
    MODEM/CP Version: N5100XXCMJ2
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    GT-N5100
    AFG Afghanistan
    ECT Nigeria
    EGY Egypt
    MID Iraq
    +4 more countries
    MRT Mauritania
    MWD Morocco
    PAK Pakistan
    TUN Tunisia
    		N5100OJVCNA1 2014-03-21 1.646 GiB
    GT-N5100_1_20150924013252_ff8q1rvtm4_fac.zip
    		Download
    GT-N5100
    FWD Morocco
    		N5100OJVCNA1 — — — Download

    No matching downloads

    How to flash N5100XWCNA1

    • N5100XWCNA1 has bootloader binary W (32). Your device must run binary W (32) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of N5100XWCNA1 by region

    First release
    March 21, 2014
    Last region
    April 9, 2014
    Duration
    20 days
    Regions
    7
    1. Day 1 · · 1 region
      MoroccoMWD
    2. Day 5 · · 1 region
      NigeriaECT
    3. Day 11 · · 1 region
      IraqMID
    4. Day 12 · · 3 regions
      AfghanistanAFGPakistanPAKTunisiaTUN
    5. Day 20 · · 1 region
      EgyptEGY

    Frequently Asked Questions

    N5100XWCNA1 is Android 4.4.2 (KitKat) firmware for Samsung GT-N5100, released for 8 countries, 9 CSC codes. Samsung built it on 2014-01-10.

    No. A newer build for GT-N5100 is available: N5100XXDNL5. Install it instead of N5100XWCNA1 unless you need this exact version. The previous build was N5100ZTCNL6.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.646 GiB; keep about twice that free on the computer to unzip it. The Samsung GT-N5100 must be on bootloader binary W (32) or lower.

    This build uses bootloader binary W (32). It can be flashed on a Samsung GT-N5100 running binary W (32) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 1 other build of this model uses the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung GT-N5100

    No changelog details available.
    Model firmware by region