Samsung Galaxy Note4 N910GDTU1DQL2 Firmware
First release:
Samsung Galaxy Note4 N910GDTU1DQL2 is an Android 6.0.1 (Marshmallow) firmware for Australia (OPS, TEL, VAU, XSA), Singapore (MM1, SIN, STH, XSP). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build N910GDTS1DQH2 https://samfirm.shop/build/N910GDTS1DQH2, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-N910G is available: N910GDTS1DRH2 https://samfirm.shop/build/N910GDTS1DRH2.
Android 6.0.1 (Marshmallow)
OS Version
2017-12-15
First release
other regions until 2018-03-23
2
Countries
8
CSC codes
1
Bootloader binary
Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.
All regional downloads
Pick your region (CSC) to download the matching firmware package.
Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
| Model | Region | CSC Version | MODEM/CP Version | Build Date | Release date | Size | File name | Download |
|---|---|---|---|---|---|---|---|---|
| SM-N910G |
MM1, SIN, STH, XSP Singapore | N910GOLB1DQL2 | N910GDTU1DQD3 | 2017-12-15 | 2018-05-17 | 2.277 GiB | SM-N910G_1_20180516184040_bgp3o2mbzx_fac.zipFile on Samsung server:SM-N910G_1_20180516184040_bgp3o2mbzx_fac.zip.enc4 Size: 2.28 GiB (2,444,422,752 B) CRC32 (Samsung FUS):F5D1CC74 Package contents:
| Download |
| SM-N910G |
OPS Australia | N910GOPS1DQL2 | N910GDTU1DQL1 | 2018-03-23 | 2018-03-26 | 2.239 GiB | SM-N910G_1_20180323100314_tz9vn57s08_fac.zipFile on Samsung server:SM-N910G_1_20180323100314_tz9vn57s08_fac.zip.enc4 Size: 2.24 GiB (2,404,340,128 B) CRC32 (Samsung FUS):A2733954 Package contents:
| Download |
| SM-N910G |
TEL Australia | N910GTEL1DQL2 | N910GDTU1DQL1 | 2017-12-15 | 2018-03-28 | 2.334 GiB | SM-N910G_1_20180328072240_26ixqy7643_fac.zipFile on Samsung server:SM-N910G_1_20180328072240_26ixqy7643_fac.zip.enc4 Size: 2.33 GiB (2,506,043,776 B) CRC32 (Samsung FUS):5E34BA78 Package contents:
| Download |
| SM-N910G |
VAU Australia | N910GVAU1DQL2 | N910GDTU1DQL1 | 2018-03-20 | 2018-03-21 | 2.227 GiB | SM-N910G_1_20180320150953_cx79m2qsgp_fac.zipFile on Samsung server:SM-N910G_1_20180320150953_cx79m2qsgp_fac.zip.enc4 Size: 2.23 GiB (2,391,624,496 B) CRC32 (Samsung FUS):00853166 Package contents:
| Download |
| SM-N910G |
XSA Australia | N910GXSA1DQL2 | N910GDTU1DQL1 | 2018-03-20 | 2018-03-21 | 2.225 GiB | SM-N910G_1_20180320142314_udduhz9hz7_fac.zipFile on Samsung server:SM-N910G_1_20180320142314_udduhz9hz7_fac.zip.enc4 Size: 2.23 GiB (2,389,418,016 B) CRC32 (Samsung FUS):9328EA48 Package contents:
| Download |
No matching downloads
How to flash N910GDTU1DQL2
- N910GDTU1DQL2 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
- CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
- HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
- The Download Mode key combo depends on the model: see all combos.
Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.
Rollout of N910GDTU1DQL2 by region
- First release
- March 21, 2018
- Last region
- May 17, 2018
- Duration
- 58 days
- Regions
- 8
- Day 1 · · 2 regionsAustraliaVAUXSA
- Day 6 · · 1 regionAustraliaOPS
- Day 8 · · 1 regionAustraliaTEL
- Day 58 · · 4 regionsSingaporeMM1SINSTHXSP
Device specifications
- Display diagonal14.5 cm (5.7")
- Display resolution2560 x 1440 pixels
- Display typeSAMOLED
- RAM3 GB
- Rear camera resolution16 MP
- Rear camera typeSingle camera
- Battery capacity3220 mAh
- Weight175 g
Specifications of SM-N9100, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.
Frequently Asked Questions
N910GDTU1DQL2 is Android 6.0.1 (Marshmallow) firmware for Samsung Galaxy Note4, released for Australia (OPS, TEL, VAU, XSA), Singapore (MM1, SIN, STH, XSP). Samsung built it on 2017-12-15.
No. A newer build for SM-N910G is available: N910GDTS1DRH2. Install it instead of N910GDTU1DQL2 unless you need this exact version. The previous build was N910GDTS1DQH2.
Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Note4 must be on bootloader binary 1 or lower.
This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy Note4 running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 3 other builds of this model use the same binary, so you can switch between them in both directions.
Other builds and changelog for Samsung Galaxy Note4
No changelog details available.
- N910GDTS1DRH2Aug 18, 2018
- N910GDTU1DQL2Dec 15, 2017
- N910GDTS1DQH2Sep 5, 2017
- N910GDTS1DQE4Jun 16, 2017
New firmware for other devices
- Galaxy S25+SM-S936B https://samfirm.shop/model/SM-S936B
- Galaxy S25+SM-S936U https://samfirm.shop/model/SM-S936U
- Galaxy Z Flip8SM-F776B https://samfirm.shop/model/SM-F776B
- Galaxy A16 5GSM-A166W https://samfirm.shop/model/SM-A166W
- Galaxy S25 UltraSM-S938B https://samfirm.shop/model/SM-S938B
- Galaxy S25 UltraSM-S938U https://samfirm.shop/model/SM-S938U
- Galaxy A27 5GSM-A276U1 https://samfirm.shop/model/SM-A276U1
- Galaxy Z Flip6SM-F741B https://samfirm.shop/model/SM-F741B