Samsung Galaxy Note Edge N915TUBU2BOH2
SM-N915T 5 countries Android 5.0.1 (Marshmallow)

Samsung Galaxy Note Edge N915TUBU2BOH2 Firmware

Samsung Galaxy Note Edge N915TUBU2BOH2 is an Android 5.0.1 (Marshmallow) firmware for 5 countries, 5 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build N915TUVU1BOG2: bootloader binary raised from 1 to 2, so after installing it there is no way back to older builds. A newer build for SM-N915T is available: N915TUBS2DRKA.

Download firmware
9.4/10 (456)21,823 times
Android 5.0.1 (Marshmallow)
OS Version
2015-08-21
Build Date
n/a
Security patch
5
Countries
5
CSC codes
2
Bootloader binary

Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    MODEM/CP Version: N915TUBU2BOH2
    ModelRegionCSC VersionSizeFile nameDownload
    SM-N915T
    BVO Bolivia
    		N915TUUB2BOH1 — —
    SM-N915T
    COO Colombia
    		N915TUUB2BOH1 — —
    SM-N915T
    PCT Puerto Rico
    		N915TUWA2BOH1 — —
    SM-N915T
    TCE Mexico
    		N915T2BOH1 — —
    SM-N915T
    TTT Trinidad & Tobago
    		N915TUUB2BOH1 — —

    No matching downloads

    How to flash N915TUBU2BOH2

    • N915TUBU2BOH2 has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Display diagonal14.2 cm (5.6")
    • Display resolution2560 x 1440 pixels
    • Display typeSAMOLED
    • RAM3 GB
    • Rear camera resolution16 MP
    • Rear camera typeSingle camera
    • Battery capacity3000 mAh
    • Weight174 g

    Specifications of SM-N915F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    N915TUBU2BOH2 is Android 5.0.1 (Marshmallow) firmware for Samsung Galaxy Note Edge, released for 5 countries, 5 CSC codes. Samsung built it on 2015-08-21.

    No. A newer build for SM-N915T is available: N915TUBS2DRKA. Install it instead of N915TUBU2BOH2 unless you need this exact version. The previous build was N915TUVU1BOG2.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Note Edge must be on bootloader binary 2 or lower.

    This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy Note Edge running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 53 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Note Edge

    • Network connectivity enhancement.

    No changelog details available.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.
    Model firmware by region