Samsung Galaxy Note5 N920PVPU1AOGD
SM-N920P 1 country Android 5.1.1 (Lollipop)

Samsung Galaxy Note5 N920PVPU1AOGD Firmware

Samsung Galaxy Note5 N920PVPU1AOGD is an Android 5.1.1 (Lollipop) firmware for United States (SPR). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. A newer build for SM-N920P is available: N920PVPS3DRH1.

Download firmware
9.0/10 (480)4,462 times
Android 5.1.1 (Lollipop)
OS Version
2015-07-16
Build Date
1
Countries
1
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Note5 use bootloader binary 3 (latest: N920PVPS3DRH1). If your device already runs binary 3, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: N920PVPU1AOGD
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-N920P
    SPR United States
    		N920PSPT1AOGD 2015-08-20 2.293 GiB
    SM-N920P_1_20180824134140_wioa6qfnot_fac.zip
    		Download

    No matching downloads

    How to flash N920PVPU1AOGD

    • N920PVPU1AOGD has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Launched withAndroid 5.1.1
    • Display diagonal14.5 cm (5.7")
    • Display resolution2560 x 1440 pixels
    • Display typeSAMOLED
    • RAM4 GB
    • Rear camera resolution16 MP
    • Rear camera typeSingle camera
    • Battery capacity3000 mAh
    • Weight170.9476 g

    Specifications of SM-N920, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    N920PVPU1AOGD is Android 5.1.1 (Lollipop) firmware for Samsung Galaxy Note5, released for United States (SPR). Samsung built it on 2015-07-16.

    No. A newer build for SM-N920P is available: N920PVPS3DRH1. Install it instead of N920PVPU1AOGD unless you need this exact version.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.293 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Note5 must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy Note5 running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". No other build of this model uses binary 1.

    Other builds and changelog for Samsung Galaxy Note5

    No changelog details available.
    Model firmware by region