Samsung Galaxy Note7 N930FXXU1APG7
SM-N930F 12 countries Android 6.0.1

Samsung Galaxy Note7 N930FXXU1APG7 Firmware

Samsung Galaxy Note7 N930FXXU1APG7 is an Android 6.0.1 firmware for 12 countries, 20 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. A newer build for SM-N930F is available: N930FXXU3BQA1.

9.4/10 (451)100,072 times
Android 6.0.1
OS Version
2016-07-08
Build Date
n/a
Security patch
12
Countries
20
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Note7 use bootloader binary 3 (latest: N930FXXU3BQA1). If your device already runs binary 3, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    23
    MODEM/CP Version: N930FXXU1APG7
    ModelRegionCSC VersionSizeFile nameDownload
    SM-N930F
    CGU Guatemala
    N930FUWM1APG4 — —
    SM-N930F
    CHE Chile
    N930F1APG4 — —
    SM-N930F
    COL Colombia
    N930FUWM1APG5 — —
    SM-N930F
    COM Colombia
    N930FUWA1APG6 — —
    SM-N930F
    DOR Dominican Republic
    N930FUWE1APG4 — —
    SM-N930F
    ICE Costa Rica
    N930FUWE1APG4 — —
    SM-N930F
    IUS Mexico
    N930F1APG4 — —
    SM-N930F
    NZC New Zealand
    N930F1APG7 — —
    SM-N930F
    PNG Papua New Guinea
    N930F1APG7 — —
    SM-N930F
    PNT Peru
    N930F1APG4 — —
    SM-N930F
    TCE Mexico
    N930F1APG4 — —
    SM-N930F
    TCE Mexico
    N930FTCE1APG4 — —
    SM-N930F
    TMM Mexico
    N930FUWT1APG4 — —
    SM-N930F
    TNZ New Zealand
    N930F1APG7 — —
    SM-N930F
    VAU Australia
    N930F1APG7 — —
    SM-N930F
    VFJ Fiji
    N930F1APG7 — —
    SM-N930F
    VNZ New Zealand
    N930F1APG7 — —
    SM-N930F
    XSA Australia
    N930F1APG7 — —
    SM-N930F
    XSA Australia
    N930FXSA1APG7 — —
    SM-N930F
    ZTM Brazil
    N930F1APG4 — —
    SM-N930F
    ZTR Brazil
    N930F1APG4 — —
    SM-N930F
    ZTR Brazil
    N930FZTR1APG4 — —
    SM-N930F
    ZVV Brazil
    N930F1APG4 — —

    No matching downloads

    Device specifications

    • Launched withAndroid 6.0
    • Display diagonal14.5 cm (5.7")
    • Display resolution2560 x 1440 pixels
    • Display typeSAMOLED
    • Processor frequency2.3 GHz
    • RAM4 GB
    • RAM typeLPDDR4
    • Rear camera resolution12 MP
    • Rear camera typeSingle camera
    • Battery capacity3500 mAh
    • Weight169 g

    How to flash N930FXXU1APG7

    • N930FXXU1APG7 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Frequently Asked Questions

    N930FXXU1APG7 is Android 6.0.1 firmware for Samsung Galaxy Note7, released for 12 countries, 20 CSC codes. Samsung built it on 2016-07-08.

    No. A newer build for SM-N930F is available: N930FXXU3BQA1. Install it instead of N930FXXU1APG7 unless you need this exact version.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Note7 must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy Note7 running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 9 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Note7

    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    Show 14 older builds
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.