SM-N960N 1 country Android 10

Samsung Galaxy Note9 N960NKSU3FVG4 Firmware

Name: Samsung Galaxy Note9 (SM-N960N)
Brand: Samsung
Availability: InStock

Samsung Galaxy Note9 N960NKSU3FVG4 is an Android 10 firmware for South Korea (KOO, KTC, LUC, SKC). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build N960NKSU3FVE1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. This is the newest build for SM-N960N.

9.4/10 (484)17,572 times

Android 10

OS Version

2022-08-11

Build Date

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 3. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

MODEM/CP Version: N960NKOU3FVG1

Model	Region	CSC Version	Build Date	Release date	Size	File name
SM-N960N	KOO South Korea	N960NOKR3FVG4	2022-08-11	2022-08-11	4.25 GiB	SM-N960N_2_20220801104440_zptckf0f88_fac.zip
SM-N960N	KTC South Korea	N960NOKR3FVG4	2022-08-11	2022-08-11	4.613 GiB	SM-N960N_2_20220801114850_7wt2yp7yh2_fac.zip
SM-N960N	LUC South Korea	N960NOKR3FVG4	2022-08-11	2022-08-11	4.691 GiB	SM-N960N_2_20220801112450_ztote9mnx8_fac.zip
SM-N960N	SKC South Korea	N960NOKR3FVG4	2022-08-11	2022-08-11	4.497 GiB	SM-N960N_2_20220801121740_2hwp0s4gzh_fac.zip

Device specifications

Launched withAndroid 8.1
Display diagonal16.3 cm (6.4")
Display resolution2960 x 1440 pixels
Display typeSAMOLED
RAM8 GB
RAM typeLPDDR4
Rear camera resolution12 MP
Rear camera typeDual camera
Battery capacity4000 mAh
Weight201 g

Specifications of SM-N960F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

How to flash N960NKSU3FVG4

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

N960NKSU3FVG4 has bootloader binary 3. Your device must run binary 3 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

N960NKSU3FVG4 is Android 10 firmware for Samsung Galaxy Note9, released for South Korea (KOO, KTC, LUC, SKC). Samsung built it on 2022-08-11.

Yes. N960NKSU3FVG4 is the newest build for SM-N960N on SamFirm. The previous build was N960NKSU3FVE1.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Note9 must be on bootloader binary 3 or lower.

This build uses bootloader binary 3. It can be flashed on a Samsung Galaxy Note9 running binary 3 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 16 other builds of this model use the same binary, so you can switch between them in both directions.