Samsung Galaxy Tab 2 7.0 WiFi P3110XXDMA2
GT-P3110 9 countries

Samsung Galaxy Tab 2 7.0 WiFi P3110XXDMA2 Firmware

Samsung Galaxy Tab 2 7.0 WiFi P3110XXDMA2 is an Android firmware for 9 countries, 10 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build P3110XXCLL3, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for GT-P3110 is available: P3110XXDNE4.

9.0/10 (473)43,209 times
n/a
OS Version
2013-01-25
First release
other regions until 2014-05-07
n/a
Security patch
9
Countries
10
CSC codes
X (33)
Bootloader binary

Bootloader binary X (33). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    7
    MODEM/CP Version: P3110XXDMA2
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    GT-P3110
    ARO Argentina
    COO Colombia
    EON, TTT Trinidad & Tobago
    		P3110UVSDMB1 2014-05-07 2014-05-07 730.082 MiB
    GT-P3110_1_20150911174013_xgep924994_fac.zip
    GT-P3110
    CHO Chile
    		P3110UVSDMB1 2013-01-25 2013-03-06 — —
    GT-P3110
    CRG
    		P3110CRGDMB1 2013-02-22 2013-02-26 — —
    GT-P3110
    PEO Peru
    		P3110UVSDMB1 2013-01-25 2013-02-28 — —
    GT-P3110
    TCE Mexico
    		P3110UVSDMB1 2014-05-07 2014-05-07 730.082 MiB
    GT-P3110_TCE_1_20140508105500_6wzshtiqdv_fac.zip
    GT-P3110
    TPA Panama
    		P3110UVSDMB1 2014-05-07 2014-05-07 730.082 MiB
    GT-P3110_TPA_1_20140508105450_m4bxqu3yg1_fac.zip
    GT-P3110
    XEZ Czechia
    		P3110XEZDMB2 2013-01-25 2013-04-19 — —

    No matching downloads

    How to flash P3110XXDMA2

    • P3110XXDMA2 has bootloader binary X (33). Your device must run binary X (33) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of P3110XXDMA2 by region

    First release
    February 26, 2013
    Last region
    May 19, 2014
    Duration
    448 days
    Regions
    10
    1. Day 1 · · 1 region
      CRG
    2. Day 3 · · 1 region
      PeruPEO
    3. Day 9 · · 1 region
      ChileCHO
    4. Day 53 · · 1 region
      CzechiaXEZ
    5. Day 436 · · 5 regions
      ArgentinaAROColombiaCOOMexicoTCEPanamaTPATrinidad & TobagoEON
    6. Day 448 · · 1 region
      Trinidad & TobagoTTT

    Device specifications

    • Launched withAndroid
    • Display diagonal17.8 cm (7")
    • Display resolution1024 x 600 pixels
    • Processor frequency1 GHz
    • Rear camera resolution3.2 MP
    • Rear camera typeSingle camera
    • Front camera resolution0.3 MP
    • Wi-Fi standardWi-Fi 4 (802.11n)
    • Weight345 g

    Frequently Asked Questions

    No. A newer build for GT-P3110 is available: P3110XXDNE4. Install it instead of P3110XXDMA2 unless you need this exact version. The previous build was P3110XXCLL3.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Tab 2 7.0 WiFi must be on bootloader binary X (33) or lower.

    This build uses bootloader binary X (33). It can be flashed on a Samsung Galaxy Tab 2 7.0 WiFi running binary X (33) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 12 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab 2 7.0 WiFi

    No changelog details available.
    Model firmware by region