SM-P600 2 countries Android 5.1.1 (KitKat)

Samsung Galaxy Note 10.1 2014 Edition P600UEUDPH3 Firmware

Name: Samsung Galaxy Note 10.1 2014 Edition (SM-P600)
Brand: Samsung
Availability: InStock

Samsung Galaxy Note 10.1 2014 Edition P600UEUDPH3 is an Android 5.1.1 (KitKat) firmware for Canada (XAC), United States (XAR). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build P600XXUDPF3 https://samfirm.shop/build/P600XXUDPF3: Android updated from Android 5.1.1 (Lollipop) to Android 5.1.1 (KitKat). A newer build for SM-P600 is available: P600UEUDQF1 https://samfirm.shop/build/P600UEUDQF1.

9.0/10 (453)17,748 times

Android 5.1.1 (KitKat)

OS Version

2016-08-24

Build Date

n/a

Security patch

Countries

CSC codes

U (30)

Bootloader binary

Bootloader binary U (30). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

MODEM/CP Version: P600UEUDPH3

Model	Region	CSC Version	Release date	Size	File name
SM-P600	XAC Canada	P600DPH3	—	—	—
SM-P600	XAC Canada	P600XACDPH3	2016-09-26	1.427 GiB	SM-P600_1_20170710153601_2n40nl8jgu_fac.zip
SM-P600	XAR United States	P600DPH3	—	—	—
SM-P600	XAR United States	P600XARDPH3	2016-09-26	1.461 GiB	SM-P600_1_20170710152040_uqn9jdapn1_fac.zip

Device specifications

Launched withAndroid
Display diagonal25.6 cm (10.1")
Display resolution2560 x 1600 pixels
Processor frequency1.9 GHz
Rear camera resolution8 MP
Rear camera typeSingle camera
Front camera resolution2 MP
Wi-Fi standardWi-Fi 5 (802.11ac)
Weight540 g

How to flash P600UEUDPH3

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

P600UEUDPH3 has bootloader binary U (30). Your device must run binary U (30) or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

P600UEUDPH3 is Android 5.1.1 (KitKat) firmware for Samsung Galaxy Note 10.1 2014 Edition, released for Canada (XAC), United States (XAR). Samsung built it on 2016-08-24.

No. A newer build for SM-P600 is available: P600UEUDQF1. Install it instead of P600UEUDPH3 unless you need this exact version. The previous build was P600XXUDPF3.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Note 10.1 2014 Edition must be on bootloader binary U (30) or lower.

This build uses bootloader binary U (30). It can be flashed on a Samsung Galaxy Note 10.1 2014 Edition running binary U (30) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 46 other builds of this model use the same binary, so you can switch between them in both directions.