SM-P600 3 countries Android 5.1.1 (Lollipop)

Samsung Galaxy Note 10.1 2014 Edition P600XXUDOC2 Firmware

Name: Samsung Galaxy Note 10.1 2014 Edition (SM-P600)
Brand: Samsung
Availability: InStock

Samsung Galaxy Note 10.1 2014 Edition P600XXUDOC2 is an Android 5.1.1 (Lollipop) firmware for Afghanistan (AFG), Egypt (EGY), Saudi Arabia (KSA). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build P600XXUDOC1 https://samfirm.shop/build/P600XXUDOC1: Android updated from Android 4.4.2 (KitKat) to Android 5.1.1 (Lollipop). A newer build for SM-P600 is available: P600UEUDQF1 https://samfirm.shop/build/P600UEUDQF1.

9.4/10 (451)12,962 times

Android 5.1.1 (Lollipop)

OS Version

n/a

Build Date

n/a

Security patch

Countries

CSC codes

U (30)

Bootloader binary

Bootloader binary U (30). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

MODEM/CP Version: P600XXUDOC2

Model	Region	CSC Version	Size	File name
SM-P600	AFG Afghanistan	P600OJVDOC1	—	—
SM-P600	EGY Egypt	P600OJVDOC1	—	—
SM-P600	KSA Saudi Arabia	P600OJVDOC1	—	—

Device specifications

Launched withAndroid
Display diagonal25.6 cm (10.1")
Display resolution2560 x 1600 pixels
Processor frequency1.9 GHz
Rear camera resolution8 MP
Rear camera typeSingle camera
Front camera resolution2 MP
Wi-Fi standardWi-Fi 5 (802.11ac)
Weight540 g

How to flash P600XXUDOC2

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

P600XXUDOC2 has bootloader binary U (30). Your device must run binary U (30) or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

P600XXUDOC2 is Android 5.1.1 (Lollipop) firmware for Samsung Galaxy Note 10.1 2014 Edition, released for Afghanistan (AFG), Egypt (EGY), Saudi Arabia (KSA).

No. A newer build for SM-P600 is available: P600UEUDQF1. Install it instead of P600XXUDOC2 unless you need this exact version. The previous build was P600XXUDOC1.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Note 10.1 2014 Edition must be on bootloader binary U (30) or lower.

This build uses bootloader binary U (30). It can be flashed on a Samsung Galaxy Note 10.1 2014 Edition running binary U (30) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 46 other builds of this model use the same binary, so you can switch between them in both directions.