Samsung Galaxy Note 10.1 2014 Edition P605MUBUBMJ6

Samsung Galaxy Note 10.1 2014 Edition P605MUBUBMJ6 Firmware

Samsung Galaxy Note 10.1 2014 Edition P605MUBUBMJ6 is an Android firmware for Argentina (ANC), Colombia (COM). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build P605MUBUBMJ5 https://samfirm.shop/build/P605MUBUBMJ5, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-P605M is available: P605MUBUDOH1 https://samfirm.shop/build/P605MUBUDOH1.

Download firmware
8.7/10 (474)8,546 times
2013-10-18
Build Date
2
Countries
2
CSC codes
U (30)
Bootloader binary

Bootloader binary U (30). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    MODEM/CP Version: P605MUBUBMJ5
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-P605M
    ANC Argentina
    P605MANCBMJ2 2014-03-13 1.453 GiB
    SM-P605M_1_20150907153026_4ilofslzlf_fac.zip
    SM-P605M
    COM Colombia
    P605MUWABMK1 2014-01-16 1.535 GiB
    SM-P605M_1_20170511145240_0cwk5zswtd_fac.zip

    No matching downloads

    How to flash P605MUBUBMJ6

    • P605MUBUBMJ6 has bootloader binary U (30). Your device must run binary U (30) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of P605MUBUBMJ6 by region

    First release
    January 16, 2014
    Last region
    March 13, 2014
    Duration
    57 days
    Regions
    2
    1. Day 1 · · 1 region
      ColombiaCOM
    2. Day 57 · · 1 region
      ArgentinaANC

    Device specifications

    • Launched withAndroid
    • Display diagonal25.6 cm (10.1")
    • Display resolution2560 x 1600 pixels
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • Front camera resolution2 MP
    • Wi-Fi standardWi-Fi 5 (802.11ac)
    • Weight547 g

    Specifications of SM-P605, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    No. A newer build for SM-P605M is available: P605MUBUDOH1. Install it instead of P605MUBUBMJ6 unless you need this exact version. The previous build was P605MUBUBMJ5.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Note 10.1 2014 Edition must be on bootloader binary U (30) or lower.

    This build uses bootloader binary U (30). It can be flashed on a Samsung Galaxy Note 10.1 2014 Edition running binary U (30) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 6 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Note 10.1 2014 Edition

    https://samfirm.shop/build/P605MUBUDOH1
    No changelog details available.