Samsung GALAXY Pocket Neo S5310MUBU0APB1
GT-S5310M 1 country Android 4.4.2

Samsung GALAXY Pocket Neo S5310MUBU0APB1 Firmware

Samsung GALAXY Pocket Neo S5310MUBU0APB1 is an Android 4.4.2 firmware for Argentina (CTI, UFN). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build S5310MUBU0APA1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for GT-S5310M is available: S5310MUBS0AQA4.

Download firmware
9.0/10 (32)434 times
Android 4.4.2
OS Version
2016-04-26
First release
other regions until 2016-05-04
1
Countries
2
CSC codes
0
Bootloader binary

Bootloader binary 0. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: S5310MUBU0APB1
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    GT-S5310M
    CTI Argentina
    		S5310MUWA0APC1 2016-05-04 2016-05-04 623.31 MiB
    GT-S5310M_1_20160504104327_3u6gtwp8hh_fac.zip
    		Download
    GT-S5310M
    UFN Argentina
    		S5310MTFG0APC1 2016-04-26 2016-04-26 540.965 MiB
    GT-S5310M_1_20160426093340_xt69i3w0fs_fac.zip
    		Download

    No matching downloads

    How to flash S5310MUBU0APB1

    • S5310MUBU0APB1 has bootloader binary 0. Your device must run binary 0 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of S5310MUBU0APB1 by region

    First release
    April 26, 2016
    Last region
    May 4, 2016
    Duration
    9 days
    Regions
    2
    1. Day 1 · · 1 region
      ArgentinaUFN
    2. Day 9 · · 1 region
      ArgentinaCTI

    Frequently Asked Questions

    S5310MUBU0APB1 is Android 4.4.2 firmware for Samsung GALAXY Pocket Neo, released for Argentina (CTI, UFN). Samsung built it on 2016-04-26.

    No. A newer build for GT-S5310M is available: S5310MUBS0AQA4. Install it instead of S5310MUBU0APB1 unless you need this exact version. The previous build was S5310MUBU0APA1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung GALAXY Pocket Neo must be on bootloader binary 0 or lower.

    This build uses bootloader binary 0. It can be flashed on a Samsung GALAXY Pocket Neo running binary 0 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 6 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung GALAXY Pocket Neo

    No changelog details available.
    Model firmware by region