GT-S5310 2 countries Android 4.1.2 (Jelly Bean)

Samsung Galaxy Pocket Neo S5310XXAMH3 Firmware

Name: Samsung Galaxy Pocket Neo (GT-S5310)
Brand: Samsung
Availability: InStock

Samsung Galaxy Pocket Neo S5310XXAMH3 is an Android 4.1.2 (Jelly Bean) firmware for Cyprus (CYO), Ireland (3IE). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build S5310XXAMG1 https://samfirm.shop/build/S5310XXAMG1: Android updated from Jelly(Android Bean) to Android 4.1.2 (Jelly Bean). A newer build for GT-S5310 is available: S5310XXANI1 https://samfirm.shop/build/S5310XXANI1.

9.4/10 (29)436 times

Android 4.1.2 (Jelly Bean)

OS Version

2014-06-06

First release

other regions until 2014-07-29

n/a

Security patch

Countries

CSC codes

X (33)

Bootloader binary

Bootloader binary X (33). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

Model	Region	CSC Version	MODEM/CP Version	Build Date	Release date	Size	File name	Download
GT-S5310	3IE Ireland	S53103IEAMH2	S5310NEAMF1	2014-07-29	2013-09-10	503.747 MiB	GT-S5310_3IE_1_20140729114410_etuoqknxt6_fac.zip
GT-S5310	CYO Cyprus	S5310OXXAMH1	S5310XXAME1	2014-06-06	2013-09-10	503.798 MiB	GT-S5310_CYO_1_20140606131420_b2b9uggfts_fac.zip

Device specifications

Launched withAndroid 4.1
Display diagonal7.62 cm (3")
Display resolution240 x 320 pixels
Display typeTFT
Processor frequency0.85 GHz
RAM0.5 GB
Rear camera resolution2 MP
Rear camera typeSingle camera
SIM cardsSingle SIM
Battery capacity1200 mAh
Weight100.2 g

How to flash S5310XXAMH3

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

S5310XXAMH3 has bootloader binary X (33). Your device must run binary X (33) or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

S5310XXAMH3 is Android 4.1.2 (Jelly Bean) firmware for Samsung Galaxy Pocket Neo, released for Cyprus (CYO), Ireland (3IE). Samsung built it on 2014-06-06.

No. A newer build for GT-S5310 is available: S5310XXANI1. Install it instead of S5310XXAMH3 unless you need this exact version. The previous build was S5310XXAMG1.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Pocket Neo must be on bootloader binary X (33) or lower.

This build uses bootloader binary X (33). It can be flashed on a Samsung Galaxy Pocket Neo running binary X (33) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 14 other builds of this model use the same binary, so you can switch between them in both directions.