Samsung Galaxy Pocket Neo S5310XXANI1
GT-S5310 4 countries Android 4.1.2 (Jelly Bean)

Samsung Galaxy Pocket Neo S5310XXANI1 Firmware

Samsung Galaxy Pocket Neo S5310XXANI1 is an Android 4.1.2 (Jelly Bean) firmware for 4 countries, 4 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build S5310XXANC1: Android updated from Jelly(Android Bean) to Android 4.1.2 (Jelly Bean). This is the newest build for GT-S5310.

Download firmware
8.8/10 (496)17,415 times
Android 4.1.2 (Jelly Bean)
OS Version
2014-10-20
Build Date
4
Countries
4
CSC codes
X (33)
Bootloader binary

Bootloader binary X (33). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    MODEM/CP Version: S5310XXAME1
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    GT-S5310
    ACR Saudi Arabia
    		S5310OJVANI1 — — — — Download
    GT-S5310
    AFR Kenya
    		S5310OJVANI1 2014-10-20 2014-10-20 584.371 MiB
    GT-S5310_1_20150924091739_gc5iygp78v_fac.zip
    		Download
    GT-S5310
    NED
    		S5310OJVANI1 — — — — Download
    GT-S5310
    XSG United Arab Emirates
    		S5310OJVANI1 — — — — Download

    No matching downloads

    How to flash S5310XXANI1

    • S5310XXANI1 has bootloader binary X (33). Your device must run binary X (33) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of S5310XXANI1 by region

    Samsung released this build in all regions (1) on the same day, October 20, 2014.

    Device specifications

    • Launched withAndroid 4.1
    • Display diagonal7.62 cm (3")
    • Display resolution240 x 320 pixels
    • Display typeTFT
    • Processor frequency0.85 GHz
    • RAM0.5 GB
    • Rear camera resolution2 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity1200 mAh
    • Weight100.2 g

    Frequently Asked Questions

    S5310XXANI1 is Android 4.1.2 (Jelly Bean) firmware for Samsung Galaxy Pocket Neo, released for 4 countries, 4 CSC codes. Samsung built it on 2014-10-20.

    Yes. S5310XXANI1 is the newest build for GT-S5310 on SamFirm. The previous build was S5310XXANC1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 584.371 MiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Pocket Neo must be on bootloader binary X (33) or lower.

    This build uses bootloader binary X (33). It can be flashed on a Samsung Galaxy Pocket Neo running binary X (33) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 14 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Pocket Neo

    No changelog details available.
    Model firmware by region