GT-S5570 1 country Android 2.3.6 (Gingerbread)

Samsung Galaxy Mini S5570MJKT3 Firmware

Name: Samsung Galaxy Mini (GT-S5570)
Brand: Samsung
Availability: InStock

Samsung Galaxy Mini S5570MJKT3 is an Android 2.3.6 (Gingerbread) firmware for Italy (OMN). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build S5570JVKT1 https://samfirm.shop/build/S5570JVKT1: bootloader binary raised from J (19) to M (22), so after installing it there is no way back to older builds. A newer build for GT-S5570 is available: S5570ZSKPC https://samfirm.shop/build/S5570ZSKPC.

9.3/10 (471)4,367 times

Android 2.3.6 (Gingerbread)

OS Version

2012-12-06

Build Date

n/a

Security patch

Countries

CSC codes

M (22)

Bootloader binary

Bootloader binary M (22). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Mini use bootloader binary Z (35) (latest: S5570ZSKPC). If your device already runs binary Z (35), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

MODEM/CP Version: S5570XWKT9

Model	Region	CSC Version	Release date	Size	File name	Download
GT-S5570	OMN Italy	S5570OMNKT1	2013-01-10	139.509 MiB	GT-S5570_OMN_1_20140123161640_za4mthpomr_fac.zip

Device specifications

Launched withAndroid 2.2
Display diagonal7.98 cm (3.14")
Display resolution240 x 320 pixels
Display typeTN
Processor frequency0.6 GHz
Rear camera resolution3 MP
Rear camera typeSingle camera
SIM cardsSingle SIM
Battery capacity1200 mAh
Weight106.6 g

How to flash S5570MJKT3

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

S5570MJKT3 has bootloader binary M (22). Your device must run binary M (22) or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

S5570MJKT3 is Android 2.3.6 (Gingerbread) firmware for Samsung Galaxy Mini, released for Italy (OMN). Samsung built it on 2012-12-06.

No. A newer build for GT-S5570 is available: S5570ZSKPC. Install it instead of S5570MJKT3 unless you need this exact version. The previous build was S5570JVKT1.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 139.509 MiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Mini must be on bootloader binary M (22) or lower.

This build uses bootloader binary M (22). It can be flashed on a Samsung Galaxy Mini running binary M (22) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". No other build of this model uses binary M (22).