Samsung Galaxy Mini S5570XWKTH
GT-S5570 1 country Android 2.3.6 (Gingerbread)

Samsung Galaxy Mini S5570XWKTH Firmware

Samsung Galaxy Mini S5570XWKTH is an Android 2.3.6 (Gingerbread) firmware for Poland (XEO). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build S5570XWKT7, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for GT-S5570 is available: S5570ZSKPC.

9.0/10 (473)4,444 times
Android 2.3.6 (Gingerbread)
OS Version
2012-02-01
Build Date
n/a
Security patch
1
Countries
1
CSC codes
X (33)
Bootloader binary

Bootloader binary X (33). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Mini use bootloader binary Z (35) (latest: S5570ZSKPC). If your device already runs binary Z (35), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: S5570XWKT4
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    GT-S5570
    XEO Poland
    		S5570OXXKT9 2012-02-17 — —

    No matching downloads

    How to flash S5570XWKTH

    • S5570XWKTH has bootloader binary X (33). Your device must run binary X (33) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Launched withAndroid 2.2
    • Display diagonal7.98 cm (3.14")
    • Display resolution240 x 320 pixels
    • Display typeTN
    • Processor frequency0.6 GHz
    • Rear camera resolution3 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity1200 mAh
    • Weight106.6 g

    Frequently Asked Questions

    S5570XWKTH is Android 2.3.6 (Gingerbread) firmware for Samsung Galaxy Mini, released for Poland (XEO). Samsung built it on 2012-02-01.

    No. A newer build for GT-S5570 is available: S5570ZSKPC. Install it instead of S5570XWKTH unless you need this exact version. The previous build was S5570XWKT7.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Mini must be on bootloader binary X (33) or lower.

    This build uses bootloader binary X (33). It can be flashed on a Samsung Galaxy Mini running binary X (33) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 10 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Mini

    No changelog details available.
    Model firmware by region