Samsung Galaxy Ace DUOS S6802XXNI1
GT-S6802 4 countries Android 2.3.6 (Gingerbread)

Samsung Galaxy Ace DUOS S6802XXNI1 Firmware

Samsung Galaxy Ace DUOS S6802XXNI1 is an Android 2.3.6 (Gingerbread) firmware for 4 countries, 4 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build S6802XXNE2, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. This is the newest build for GT-S6802.

Download firmware
9.2/10 (457)17,087 times
Android 2.3.6 (Gingerbread)
OS Version
4
Countries
4
CSC codes
X (33)
Bootloader binary

Bootloader binary X (33). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    MODEM/CP Version: S6802XXNE1
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    GT-S6802
    CAC Uzbekistan
    		S6802QXENG2 — — — Download
    GT-S6802
    RTL
    		S6802QXENG2 — — — Download
    GT-S6802
    SER Russia
    		S6802QXENG2 2014-10-15 — — Download
    GT-S6802
    SKZ Kazakhstan
    		S6802QXENG2 — — — Download

    No matching downloads

    How to flash S6802XXNI1

    • S6802XXNI1 has bootloader binary X (33). Your device must run binary X (33) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of S6802XXNI1 by region

    Samsung released this build in all regions (1) on the same day, October 15, 2014.

    Device specifications

    • Launched withAndroid 2.3
    • Display diagonal8.89 cm (3.5")
    • Display resolution320 x 480 pixels
    • Display typeTFT
    • Processor frequency0.832 GHz
    • RAM0.5 GB
    • Rear camera resolution5 MP
    • Rear camera typeSingle camera
    • SIM cardsDual SIM
    • Battery capacity1300 mAh
    • Weight122 g

    Frequently Asked Questions

    S6802XXNI1 is Android 2.3.6 (Gingerbread) firmware for Samsung Galaxy Ace DUOS, released for 4 countries, 4 CSC codes.

    Yes. S6802XXNI1 is the newest build for GT-S6802 on SamFirm. The previous build was S6802XXNE2.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Ace DUOS must be on bootloader binary X (33) or lower.

    This build uses bootloader binary X (33). It can be flashed on a Samsung Galaxy Ace DUOS running binary X (33) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 3 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Ace DUOS

    No changelog details available.
    Model firmware by region