Samsung Galaxy SCV33KDU1BRE1 Firmware
Samsung Galaxy SCV33KDU1BRE1 is an Android 7.0 (Nougat) firmware for Japan (KDI). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build SCV33KDU1BQL3 https://samfirm.shop/build/SCV33KDU1BQL3, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SCV33 is available: SCV33KDU1CRH2 https://samfirm.shop/build/SCV33KDU1CRH2.
Android 7.0 (Nougat)
OS Version
2018-05-28
Build Date
1
Countries
1
CSC codes
1
Bootloader binary
Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.
All regional downloads
Pick your region (CSC) to download the matching firmware package.
Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
MODEM/CP Version: SCV33KDU1BRE1
| Model | Region | CSC Version | Release date | Size | File name | Download |
|---|---|---|---|---|---|---|
| SCV33 |
KDI Japan | KDU1BRE11BRE1 | — | — | — | Download |
| SCV33 |
KDI Japan | KDU1BRE1KDJ1BRE1 | — | — | — | Download |
| SCV33 |
KDI Japan | KDU1BRE1KDY1BRE1 | — | — | — | Download |
| SCV33 |
KDI Japan | SCV33KDJ1BRE1 | 2018-06-12 | 2.949 GiB | SCV33_11_20180803071427_79g34bdw0i_fac.zip | Download |
| SCV33 |
KDI Japan | SCV33KDY1BRE1 | 2018-06-12 | 2.944 GiB | SCV33_10_20180803071227_6g834su4uo_fac.zip | Download |
| SCV33 |
KDI Japan | SCV33KDI1BRE1 | 2018-06-12 | 2.912 GiB | SCV33_1_20180802204540_fiyogq90ax_fac.zip | Download |
No matching downloads
How to flash SCV33KDU1BRE1
- SCV33KDU1BRE1 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
- CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
- HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
- The Download Mode key combo depends on the model: see all combos.
Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.
Frequently Asked Questions
SCV33KDU1BRE1 is Android 7.0 (Nougat) firmware for Samsung Galaxy, released for Japan (KDI). Samsung built it on 2018-05-28.
No. A newer build for SCV33 is available: SCV33KDU1CRH2. Install it instead of SCV33KDU1BRE1 unless you need this exact version. The previous build was SCV33KDU1BQL3.
Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy must be on bootloader binary 1 or lower.
This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 4 other builds of this model use the same binary, so you can switch between them in both directions.
Other builds and changelog for Samsung Galaxy
No changelog details available.
- SCV33KDU1CRH2Aug 2, 2018
- SCV33KDU1BRG1Jul 14, 2018
- SCV33KDU1BRE1May 28, 2018
- SCV33KDU1BQL3Dec 11, 2017
- SCV33KDU1BQI1Sep 7, 2017