SM-T111 5 countries Android 4.2.2 (Jelly)

Samsung Galaxy Tab3 Lite T111XXUBOC2 Firmware

Name: Samsung Galaxy Tab3 Lite (SM-T111)
Brand: Samsung
Availability: InStock

Samsung Galaxy Tab3 Lite T111XXUBOC2 is an Android 4.2.2 (Jelly) firmware for 5 countries, 5 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T111XXUBOC1 https://samfirm.shop/build/T111XXUBOC1: Android updated from Jelly(Android Bean) to Android 4.2.2 (Jelly). This is the newest build for SM-T111.

8.7/10 (472)25,774 times

Android 4.2.2 (Jelly)

OS Version

2015-03-18

First release

other regions until 2015-04-02

n/a

Security patch

Countries

CSC codes

U (30)

Bootloader binary

Bootloader binary U (30). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

Model	Region	CSC Version	MODEM/CP Version	Build Date	Release date	Size	File name
SM-T111	BNG Bangladesh INS India NPL Nepal SLK Sri Lanka	T111ODDBOC2	T111XXUAOC2	2015-04-02	2015-04-02	854.512 MiB	SM-T111_1_20150402135339_ds7pa5cxei_fac.zip
SM-T111	NPL Nepal	T111ODDBOC2	T111XXUBOC2	2015-03-18	—	—	—
SM-T111	TML	T111ODDBOC2	T111XXUAOC2	2015-03-18	2015-04-02	—	—

Device specifications

Launched withAndroid
Display diagonal17.8 cm (7")
Display resolution1024 x 600 pixels
Processor frequency1.2 GHz
Processor familyMarvell
Processor modelPXA986
Rear camera resolution2 MP
Rear camera typeSingle camera
Wi-Fi standardWi-Fi 4 (802.11n)
Weight322 g

How to flash T111XXUBOC2

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

T111XXUBOC2 has bootloader binary U (30). Your device must run binary U (30) or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

T111XXUBOC2 is Android 4.2.2 (Jelly) firmware for Samsung Galaxy Tab3 Lite, released for 5 countries, 5 CSC codes. Samsung built it on 2015-03-18.

Yes. T111XXUBOC2 is the newest build for SM-T111 on SamFirm. The previous build was T111XXUBOC1.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 854.512 MiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab3 Lite must be on bootloader binary U (30) or lower.

This build uses bootloader binary U (30). It can be flashed on a Samsung Galaxy Tab3 Lite running binary U (30) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 26 other builds of this model use the same binary, so you can switch between them in both directions.