Samsung Galaxy Tab3 Lite T111XXUBNI1
SM-T111 5 countries Android 4.2.2 (Jelly)

Samsung Galaxy Tab3 Lite T111XXUBNI1 Firmware

Samsung Galaxy Tab3 Lite T111XXUBNI1 is an Android 4.2.2 (Jelly) firmware for 5 countries, 5 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T111XXUAPA1: Android updated from Jelly(Android Bean) to Android 4.2.2 (Jelly). A newer build for SM-T111 is available: T111XXUBOC2.

Download firmware
8.9/10 (459)21,813 times
Android 4.2.2 (Jelly)
OS Version
2014-09-19
Build Date
5
Countries
5
CSC codes
U (30)
Bootloader binary

Bootloader binary U (30). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    ModelRegionCSC VersionMODEM/CP VersionRelease dateSizeFile nameDownload
    SM-T111
    BNG Bangladesh
    NPL Nepal
    		T111ODDBNI1T111XXUANH2 2014-09-26 854.512 MiB
    SM-T111_1_20150402135339_ds7pa5cxei_fac.zip
    		Download
    SM-T111
    INS India
    		T111ODDBNI1T111XXUBNI1 — — — Download
    SM-T111
    SLK Sri Lanka
    		T111ODDBNI1T111XXUBNI1 — — — Download
    SM-T111
    TML
    		T111ODDBNI1T111XXUBNI1 — — — Download

    No matching downloads

    How to flash T111XXUBNI1

    • T111XXUBNI1 has bootloader binary U (30). Your device must run binary U (30) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of T111XXUBNI1 by region

    Samsung released this build in all regions (2) on the same day, September 26, 2014.

    Device specifications

    • Launched withAndroid
    • Display diagonal17.8 cm (7")
    • Display resolution1024 x 600 pixels
    • Processor frequency1.2 GHz
    • Processor familyMarvell
    • Processor modelPXA986
    • Rear camera resolution2 MP
    • Rear camera typeSingle camera
    • Wi-Fi standardWi-Fi 4 (802.11n)
    • Weight322 g

    Frequently Asked Questions

    T111XXUBNI1 is Android 4.2.2 (Jelly) firmware for Samsung Galaxy Tab3 Lite, released for 5 countries, 5 CSC codes. Samsung built it on 2014-09-19.

    No. A newer build for SM-T111 is available: T111XXUBOC2. Install it instead of T111XXUBNI1 unless you need this exact version. The previous build was T111XXUAPA1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 854.512 MiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab3 Lite must be on bootloader binary U (30) or lower.

    This build uses bootloader binary U (30). It can be flashed on a Samsung Galaxy Tab3 Lite running binary U (30) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 26 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab3 Lite

    No changelog details available.
    Model firmware by region