Samsung Galaxy Tab3 Lite 7.0 T113XXU0APC2
SM-T113 13 countries Android 4.4.4 (KitKat)

Samsung Galaxy Tab3 Lite 7.0 T113XXU0APC2 Firmware

Samsung Galaxy Tab3 Lite 7.0 T113XXU0APC2 is an Android 4.4.4 (KitKat) firmware for 13 countries, 16 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T113XXU0APC1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-T113 is available: T113XXU0ARB1.

Download firmware
9.4/10 (461)69,424 times
Android 4.4.4 (KitKat)
OS Version
2016-03-17
Build Date
13
Countries
16
CSC codes
0
Bootloader binary

Bootloader binary 0. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    3
    MODEM/CP Version: T113XXU0APC2
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-T113
    AFG Afghanistan
    BTC, LYS Libya
    KSA, WTL Saudi Arabia
    MID Iraq
    +7 more countries
    MWD Morocco
    SAC Algeria
    THR Iran
    TUN Tunisia
    TUR Turkey
    XFA, XFE South Africa
    XSG United Arab Emirates
    		T113OJV0APC1, T113OJV0APD1 2016-04-11 716.782 MiB
    SM-T113_1_20170411132352_mifjjnwj5d_fac.zip
    MD5:be96a8360f0c8ee13937b055c0bac143
    SHA1:f9bc21ef27ae00dc53e9584d8b59c43032d7aba8
    		Download
    SM-T113
    AFR Kenya
    		T113OJV0APC1 2016-04-11 717.108 MiB
    SM-T113_1_20180224154840_hxuf59xzgd_fac.zip
    		Download
    SM-T113
    ILO Israel
    		T1130APC1 — — — Download

    No matching downloads

    How to flash T113XXU0APC2

    • T113XXU0APC2 has bootloader binary 0. Your device must run binary 0 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of T113XXU0APC2 by region

    First release
    April 11, 2016
    Last region
    May 11, 2016
    Duration
    31 days
    Regions
    15
    1. Day 1 · · 9 regions
      AfghanistanAFGIranTHRIraqMIDKenyaAFRMoroccoMWDSaudi ArabiaKSASouth AfricaXFETurkeyTURUnited Arab EmiratesXSG
    2. Day 8 · · 5 regions
      AlgeriaSACLibyaLYSSaudi ArabiaWTLSouth AfricaXFATunisiaTUN
    3. Day 31 · · 1 region
      LibyaBTC

    Device specifications

    • Launched withAndroid
    • Display diagonal17.8 cm (7")
    • Display resolution1024 x 600 pixels
    • Processor frequency1.3 GHz
    • Rear camera resolution2 MP
    • Rear camera typeSingle camera
    • Wi-Fi standardWi-Fi 4 (802.11n)
    • Weight310 g

    Frequently Asked Questions

    T113XXU0APC2 is Android 4.4.4 (KitKat) firmware for Samsung Galaxy Tab3 Lite 7.0, released for 13 countries, 16 CSC codes. Samsung built it on 2016-03-17.

    No. A newer build for SM-T113 is available: T113XXU0ARB1. Install it instead of T113XXU0APC2 unless you need this exact version. The previous build was T113XXU0APC1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Tab3 Lite 7.0 must be on bootloader binary 0 or lower.

    This build uses bootloader binary 0. It can be flashed on a Samsung Galaxy Tab3 Lite 7.0 running binary 0 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 27 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab3 Lite 7.0

    No changelog details available.
    Model firmware by region