Samsung Galaxy Tab3 Kids T2105XWAPA1
SM-T2105 1 country Android 4.1.2 (Jelly)

Samsung Galaxy Tab3 Kids T2105XWAPA1 Firmware

Samsung Galaxy Tab3 Kids T2105XWAPA1 is an Android 4.1.2 (Jelly) firmware for Netherlands (PHN). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T2105XWANA1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-T2105 is available: T2105XXAOH1.

Download firmware
9.1/10 (455)8,670 times
Android 4.1.2 (Jelly)
OS Version
2016-01-11
First release
other regions until 2016-01-22
1
Countries
1
CSC codes
W (32)
Bootloader binary

Bootloader binary W (32). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Tab3 Kids use bootloader binary X (33) (latest: T2105XXAOH1). If your device already runs binary X (33), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: T2105XWAPA1
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-T2105
    PHN Netherlands
    		T2105PHNAPA1 2016-01-22 2016-01-22 1.211 GiB
    SM-T2105_1_20160122110053_z27rtpjqfg_fac.zip
    SM-T2105
    PHN Netherlands
    		T2105APA1 2016-01-11 — — —

    No matching downloads

    How to flash T2105XWAPA1

    • T2105XWAPA1 has bootloader binary W (32). Your device must run binary W (32) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Processor frequency1.2 GHz
    • Compatible memory cardsMicroSD (TransFlash)
    • Maximum memory card size32 GB
    • Display diagonal17.8 cm (7")
    • Display resolution1024 x 600 pixels
    • Display technologyTFT
    • Rear camera resolution3 MP
    • Maximum video resolution1024 x 600 pixels
    • Video capturing speed30 fps

    Frequently Asked Questions

    T2105XWAPA1 is Android 4.1.2 (Jelly) firmware for Samsung Galaxy Tab3 Kids, released for Netherlands (PHN). Samsung built it on 2016-01-11.

    No. A newer build for SM-T2105 is available: T2105XXAOH1. Install it instead of T2105XWAPA1 unless you need this exact version. The previous build was T2105XWANA1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.211 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab3 Kids must be on bootloader binary W (32) or lower.

    This build uses bootloader binary W (32). It can be flashed on a Samsung Galaxy Tab3 Kids running binary W (32) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 16 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab3 Kids

    No changelog details available.
    Model firmware by region