Samsung Galaxy Tab3 7.0 T210XXAMKE
SM-T210 8 countries Android 4.4.2 (Jelly)

Samsung Galaxy Tab3 7.0 T210XXAMKE Firmware

Samsung Galaxy Tab3 7.0 T210XXAMKE is an Android 4.4.2 (Jelly) firmware for 8 countries, 8 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T210XXAMKC: Android updated from Jelly(Android Bean) to Android 4.4.2 (Jelly). A newer build for SM-T210 is available: T210XXBPJ2.

Download firmware
9.1/10 (475)34,581 times
Android 4.4.2 (Jelly)
OS Version
2013-11-15
Build Date
8
Countries
8
CSC codes
X (33)
Bootloader binary

Bootloader binary X (33). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    MODEM/CP Version: T210XXAMKE
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-T210
    CAC Uzbekistan
    SER Russia
    		T210OXEAMK1 2013-12-05 860.33 MiB
    SM-T210_1_20160215121640_pcknv48ydq_fac.zip
    SM-T210
    PHN Netherlands
    		T210PHNAMK1 2013-12-13 823.066 MiB
    SM-T210_PHN_1_20150317170340_qnjmy0y07h_fac.zip
    SM-T210
    ROM Romania
    		T210OXXAMK1 2013-12-05 843.248 MiB
    SM-T210_1_20150428200626_ts4v4ldqqs_fac.zip
    SM-T210
    SEK Ukraine
    SKZ Kazakhstan
    		T210OXEAMK1 2013-12-05 839.054 MiB
    SM-T210_1_20151103114340_0d5qb2oexl_fac.zip
    SM-T210
    XEG Germany
    		T210XEGAMK5 2013-12-04 828.204 MiB
    SM-T210_XEG_1_20150127080930_1c6udwrwn0_fac.zip
    SM-T210
    XEZ Czechia
    		T210OXXAMK1 2013-12-06 819.269 MiB
    SM-T210_XEZ_1_20150326071540_sqcde91nri_fac.zip

    No matching downloads

    How to flash T210XXAMKE

    • T210XXAMKE has bootloader binary X (33). Your device must run binary X (33) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of T210XXAMKE by region

    First release
    December 4, 2013
    Last region
    December 13, 2013
    Duration
    10 days
    Regions
    8
    1. Day 1 · · 1 region
      GermanyXEG
    2. Day 2 · · 5 regions
      KazakhstanSKZRomaniaROMRussiaSERUkraineSEKUzbekistanCAC
    3. Day 3 · · 1 region
      CzechiaXEZ
    4. Day 10 · · 1 region
      NetherlandsPHN

    Device specifications

    • Launched withAndroid
    • Display diagonal17.8 cm (7")
    • Display resolution1024 x 600 pixels
    • Processor frequency1.2 GHz
    • Rear camera resolution3 MP
    • Rear camera typeSingle camera
    • Front camera resolution1.3 MP
    • Wi-Fi standardWi-Fi 4 (802.11n)
    • Weight300 g

    Frequently Asked Questions

    T210XXAMKE is Android 4.4.2 (Jelly) firmware for Samsung Galaxy Tab3 7.0, released for 8 countries, 8 CSC codes. Samsung built it on 2013-11-15.

    No. A newer build for SM-T210 is available: T210XXBPJ2. Install it instead of T210XXAMKE unless you need this exact version. The previous build was T210XXAMKC.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Tab3 7.0 must be on bootloader binary X (33) or lower.

    This build uses bootloader binary X (33). It can be flashed on a Samsung Galaxy Tab3 7.0 running binary X (33) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 28 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab3 7.0

    No changelog details available.
    Model firmware by region