Samsung Galaxy Tab A7 Lite T225NDXS2CWA7
SM-T225N 13 countries Android 13

Samsung Galaxy Tab A7 Lite T225NDXS2CWA7 Firmware

Samsung Galaxy Tab A7 Lite T225NDXS2CWA7 is an Android 13 firmware for 13 countries, 17 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T225NKOU1CWA3: bootloader binary raised from 1 to 2, so after installing it there is no way back to older builds. A newer build for SM-T225N is available: T225NDXSAEYE4.

Download firmware
9.1/10 (489)72,795 times
Android 13
OS Version
2023-02-28
First release
other regions until 2023-03-01
2023-01-01
Security patch
13
Countries
17
CSC codes
2
Bootloader binary

Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Tab A7 Lite use bootloader binary A (10) (latest: T225NDXSAEYE4). If your device already runs binary A (10), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: T225NDXS2CWA7
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-T225N
    ACR, KSA Saudi Arabia
    AFR, DKR Kenya
    ECT Nigeria
    EGY Egypt
    +9 more countries
    ILO Israel
    LYS Libya
    MID Iraq
    MWD Morocco
    PAK Pakistan
    TUN Tunisia
    XFA, XFE, XFV South Africa
    XSG United Arab Emirates
    ILP
    		T225NOJM2CWA7 2023-03-01 3.76 GiB
    SM-T225N_3_20230214222210_ocwd8tgiyi_fac.zip
    		Download

    No matching downloads

    How to flash T225NDXS2CWA7

    • T225NDXS2CWA7 has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in T225NDXS2CWA7

    · The security of your device has been improved.

    Rollout of T225NDXS2CWA7 by region

    First release
    March 1, 2023
    Last region
    March 2, 2023
    Duration
    2 days
    Regions
    17
    1. Day 1 · · 15 regions
      EgyptEGYIraqMIDIsraelILOKenyaAFRDKRLibyaLYSMoroccoMWDNigeriaECTPakistanPAKSaudi ArabiaACRKSASouth AfricaXFETunisiaTUNUnited Arab EmiratesXSG
      +1 more country
      ILP
    2. Day 2 · · 2 regions
      South AfricaXFAXFV

    Device specifications

    • Display diagonal22.1 cm (8.7")
    • Display resolution1340 x 800 pixels
    • Processor frequency2.3 GHz
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • Front camera resolution2 MP
    • Wi-Fi standardWi-Fi 5 (802.11ac)
    • Weight371 g

    Frequently Asked Questions

    T225NDXS2CWA7 is Android 13 firmware for Samsung Galaxy Tab A7 Lite, released for 13 countries, 17 CSC codes. It includes the 2023-01-01 security patch. Samsung built it on 2023-02-28.

    No. A newer build for SM-T225N is available: T225NDXSAEYE4. Install it instead of T225NDXS2CWA7 unless you need this exact version. The previous build was T225NKOU1CWA3.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 3.76 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab A7 Lite must be on bootloader binary 2 or lower.

    This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy Tab A7 Lite running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 2 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab A7 Lite

    • Security

    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    No changelog details available.

    • Security
    The device is protected with improved security.

    No changelog details available.
    One UI 6.1 Upgrade
    Customize your Galaxy

    New wallpaper editing features
    Decorate your wallpaper however you like. When you select an image to use as your wallpaper, you can now apply frames and effects.

    Customize alarm alerts
    Use an image, video, or AR emoji to create your own custom alert screens for each alarm. You can even change the layout of where the alarm information appears on the screen.

    More stickers to personalize your calendar
    You can now add up to 2 stickers for each date on y...

    Show 15 older builds
    No changelog details available.

    • Security
    The device is protected with improved security.

    No changelog details available.
    One UI 6.0 Upgrade (Android 14)
    Quick panel

    New button layout
    The quick panel has a new layout that makes it easier to access the features you use most. Wi-Fi and Bluetooth now have their own dedicated buttons at the top of the screen, while visual features, like Dark mode and Eye comfort shield have been moved to the bottom. Other quick settings buttons appear in a customizable area in the middle.

    Instantly access the full quick panel
    By default, a compact quick panel with notifications ap...

    No changelog details available.

    • The security of your device has been improved.

    No changelog details available.

    • The security of your device has been improved.

    No changelog details available.
    One UI Core 5.1.1 Update
    Multitasking

    Better app previews on the Recents screen
    The Recents screen now shows apps as they will appear after you open them. You can easily see if an app is opened in split screen, full screen, or as a pop-up.

    Easily switch from pop-up view to split screen
    Press and hold the handle at the top of the pop-up window, then drag the app to the side of the screen where you want it to be shown.

    Restore pop-ups snapped to the edge of the screen
    Drag an app in pop-up v...

    • The security of your device has been improved.

    No changelog details available.

    • The security of your device has been improved.

    Model firmware by region