Samsung Galaxy Tab A 7.0 T285MUBU0AQA2
SM-T285M 2 countries Android 5.1.1 (Lollipop)

Samsung Galaxy Tab A 7.0 T285MUBU0AQA2 Firmware

Samsung Galaxy Tab A 7.0 T285MUBU0AQA2 is an Android 5.1.1 (Lollipop) firmware for Ecuador (ALE), Uruguay (UPO). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T285MUBU0APL4, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-T285M is available: T285MUBU0ATC2.

Download firmware
9.0/10 (33)8,922 times
Android 5.1.1 (Lollipop)
OS Version
2017-01-19
First release
other regions until 2017-02-27
2
Countries
2
CSC codes
0
Bootloader binary

Bootloader binary 0. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-T285M
    ALE Ecuador
    		T285MUUB0AQB1T285MUBU0AQB1 2017-02-24 2017-02-24 1.049 GiB
    SM-T285M_1_20170224132813_otxf824mki_fac.zip
    		Download
    SM-T285M
    ALE Ecuador
    		T285MUUB0AQB1T285MUBU0AQA2 2017-01-19 — — — Download
    SM-T285M
    UPO Uruguay
    		T285MUUB0AQA1T285MUBU0AQA1 2017-02-27 2017-02-27 1.049 GiB
    SM-T285M_1_20170227123652_2tnlwddyaq_fac.zip
    		Download
    SM-T285M
    UPO Uruguay
    		T285MUUB0AQA1T285MUBU0AQA2 2017-01-19 — — — Download

    No matching downloads

    How to flash T285MUBU0AQA2

    • T285MUBU0AQA2 has bootloader binary 0. Your device must run binary 0 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of T285MUBU0AQA2 by region

    First release
    February 24, 2017
    Last region
    February 27, 2017
    Duration
    4 days
    Regions
    2
    1. Day 1 · · 1 region
      EcuadorALE
    2. Day 4 · · 1 region
      UruguayUPO

    Device specifications

    • Launched withAndroid
    • Display diagonal17.8 cm (7")
    • Display resolution1280 x 720 pixels
    • Rear camera resolution5 MP
    • Rear camera typeSingle camera
    • Front camera resolution2 MP
    • Wi-Fi standardWi-Fi 4 (802.11n)
    • Weight289 g

    Specifications of SM-T285, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    T285MUBU0AQA2 is Android 5.1.1 (Lollipop) firmware for Samsung Galaxy Tab A 7.0, released for Ecuador (ALE), Uruguay (UPO). Samsung built it on 2017-01-19.

    No. A newer build for SM-T285M is available: T285MUBU0ATC2. Install it instead of T285MUBU0AQA2 unless you need this exact version. The previous build was T285MUBU0APL4.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.049 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab A 7.0 must be on bootloader binary 0 or lower.

    This build uses bootloader binary 0. It can be flashed on a Samsung Galaxy Tab A 7.0 running binary 0 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 16 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab A 7.0

    No changelog details available.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.

    • Overall stability of functions improved.

    No changelog details available.
    Model firmware by region