SM-T285YD 4 countries Android 5.1.1 (Lollipop)

Samsung Galaxy Tab A 7.0 T285YDDDU0AQB1 Firmware

Name: Samsung Galaxy Tab A 7.0 (SM-T285YD)
Brand: Samsung
Availability: InStock

Samsung Galaxy Tab A 7.0 T285YDDDU0AQB1 is an Android 5.1.1 (Lollipop) firmware for 4 countries, 4 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T285YDDDU0AQA2, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-T285YD is available: T285YDDDU0ARD3.

9.2/10 (452)16,867 times

Android 5.1.1 (Lollipop)

OS Version

2017-02-20

Build Date

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 0. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

Model	Region	CSC Version	MODEM/CP Version	Release date	Size	File name
SM-T285YD	BNG Bangladesh SLK Sri Lanka	T285YDODD0AQC1	T285YDDDU0AQC1	2017-04-14	1.09 GiB	SM-T285YD_1_20171106164027_plaqpatd52_fac.zip
SM-T285YD	INS India	T285YDODD0AQC1	T285YDDDU0AQB1	—	—	—
SM-T285YD	NPL Nepal	T285YDODD0AQC1	T285YDDDU0AQB1	—	—	—

Device specifications

Display diagonal17.8 cm (7")
Display resolution1280 x 800 pixels
Rear camera resolution8 MP
Rear camera typeSingle camera
Front camera resolution2 MP
Wi-Fi standardWi-Fi 4 (802.11n)
Weight289 g

Specifications of SM-T285Y, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

How to flash T285YDDDU0AQB1

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

T285YDDDU0AQB1 has bootloader binary 0. Your device must run binary 0 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

T285YDDDU0AQB1 is Android 5.1.1 (Lollipop) firmware for Samsung Galaxy Tab A 7.0, released for 4 countries, 4 CSC codes. Samsung built it on 2017-02-20.

No. A newer build for SM-T285YD is available: T285YDDDU0ARD3. Install it instead of T285YDDDU0AQB1 unless you need this exact version. The previous build was T285YDDDU0AQA2.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.09 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab A 7.0 must be on bootloader binary 0 or lower.

This build uses bootloader binary 0. It can be flashed on a Samsung Galaxy Tab A 7.0 running binary 0 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 16 other builds of this model use the same binary, so you can switch between them in both directions.