Samsung Galaxy Tab A 7.0 T285YDDDU0APG1
SM-T285YD 3 countries Android 5.1.1 (Lollipop)

Samsung Galaxy Tab A 7.0 T285YDDDU0APG1 Firmware

Samsung Galaxy Tab A 7.0 T285YDDDU0APG1 is an Android 5.1.1 (Lollipop) firmware for Bangladesh (BNG), India (INS), Nepal (NPL). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. A newer build for SM-T285YD is available: T285YDDDU0ARD3.

Download firmware
9.1/10 (461)13,207 times
Android 5.1.1 (Lollipop)
OS Version
2016-07-01
Build Date
3
Countries
3
CSC codes
0
Bootloader binary

Bootloader binary 0. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    MODEM/CP Version: T285YDDDU0APG1
    ModelRegionCSC VersionSizeFile nameDownload
    SM-T285YD
    BNG Bangladesh
    		T285YDODD0APG1 — — Download
    SM-T285YD
    INS India
    		T285YDODD0APFC — — Download
    SM-T285YD
    NPL Nepal
    		T285YDODD0APG1 — — Download

    No matching downloads

    How to flash T285YDDDU0APG1

    • T285YDDDU0APG1 has bootloader binary 0. Your device must run binary 0 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Display diagonal17.8 cm (7")
    • Display resolution1280 x 800 pixels
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • Front camera resolution2 MP
    • Wi-Fi standardWi-Fi 4 (802.11n)
    • Weight289 g

    Specifications of SM-T285Y, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    T285YDDDU0APG1 is Android 5.1.1 (Lollipop) firmware for Samsung Galaxy Tab A 7.0, released for Bangladesh (BNG), India (INS), Nepal (NPL). Samsung built it on 2016-07-01.

    No. A newer build for SM-T285YD is available: T285YDDDU0ARD3. Install it instead of T285YDDDU0APG1 unless you need this exact version.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Tab A 7.0 must be on bootloader binary 0 or lower.

    This build uses bootloader binary 0. It can be flashed on a Samsung Galaxy Tab A 7.0 running binary 0 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 16 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab A 7.0

    No changelog details available.

    - Improved performance
    ㆍThe Stability of GPS has been improved.

    No changelog details available.

    - Other bug fixes
    ㆍFixes an issue that a little noise occurs
    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    No changelog details available.
    Show 2 older builds

    ㆍDevice stability improvements, bug fixes.
    ㆍNew and / or enhanced features.
    ㆍFurther improvements to performance.

    No changelog details available.
    Model firmware by region