Samsung Galaxy Tab A (8.0, 2019) T295NKSU2ASL2
SM-T295N 1 country Android 9 (Pie)

Samsung Galaxy Tab A (8.0, 2019) T295NKSU2ASL2 Firmware

Samsung Galaxy Tab A (8.0, 2019) T295NKSU2ASL2 is an Android 9 (Pie) firmware for South Korea (KOO). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T295NKSU1ASH1: bootloader binary raised from 1 to 2, so after installing it there is no way back to older builds. A newer build for SM-T295N is available: T295NKSU4CUL1.

9.2/10 (472)8,658 times
Android 9 (Pie)
OS Version
2019-12-17
First release
other regions until 2019-12-18
n/a
Security patch
1
Countries
1
CSC codes
2
Bootloader binary

Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Tab A (8.0, 2019) use bootloader binary 4 (latest: T295NKSU4CUL1). If your device already runs binary 4, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: T295NKSU2ASL2
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-T295N
    KOO South Korea
    		T295NKOO2ASL2 2019-12-18 2020-01-02 2.241 GiB
    SM-T295N_1_20210421233255_z53w6jwc6w_fac.zip
    SM-T295N
    KOO South Korea
    		T295N2ASL2 2019-12-17 — — —

    No matching downloads

    How to flash T295NKSU2ASL2

    • T295NKSU2ASL2 has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Display diagonal20.3 cm (8")
    • Display resolution1280 x 800 pixels
    • Processor frequency2 GHz
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • Front camera resolution2 MP
    • Wi-Fi standardWi-Fi 4 (802.11n)
    • Weight347 g

    Frequently Asked Questions

    T295NKSU2ASL2 is Android 9 (Pie) firmware for Samsung Galaxy Tab A (8.0, 2019), released for South Korea (KOO). Samsung built it on 2019-12-17.

    No. A newer build for SM-T295N is available: T295NKSU4CUL1. Install it instead of T295NKSU2ASL2 unless you need this exact version. The previous build was T295NKSU1ASH1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.241 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab A (8.0, 2019) must be on bootloader binary 2 or lower.

    This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy Tab A (8.0, 2019) running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". No other build of this model uses binary 2.

    Other builds and changelog for Samsung Galaxy Tab A (8.0, 2019)

    No changelog details available.
    Model firmware by region