SM-T315 7 countries Android 4.4.2 (KitKat)

Samsung Galaxy Tab3 8.0 T315XXUBNF3 Firmware

Name: Samsung Galaxy Tab3 8.0 (SM-T315)
Brand: Samsung
Availability: InStock

Samsung Galaxy Tab3 8.0 T315XXUBNF3 is an Android 4.4.2 (KitKat) firmware for 7 countries, 7 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T315XWUANA1 https://samfirm.shop/build/T315XWUANA1: Android updated from Jelly(Android Bean) to Android 4.4.2 (KitKat). A newer build for SM-T315 is available: T315XXUBPA3 https://samfirm.shop/build/T315XXUBPA3.

9.2/10 (472)30,205 times

Android 4.4.2 (KitKat)

OS Version

2014-06-16

Build Date

n/a

Security patch

Countries

CSC codes

U (30)

Bootloader binary

Bootloader binary U (30). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

MODEM/CP Version: T315XXUBNE5

Model	Region	CSC Version	Size	File name
SM-T315	AUT Switzerland	T315AUTBNF1	1.343 GiB	SM-T315_1_20170328111752_b9315f7wze_fac.zip
SM-T315	BTU United Kingdom	T315BTUBNF2	1.299 GiB	SM-T315_1_20170403194557_u5cl9id7g4_fac.zip
SM-T315	NEE Nordic Europe	T315NEEBNF1	1.293 GiB	SM-T315_1_20170323101802_gq45ani9fv_fac.zip
SM-T315	ORL Romania	T315ORLBNF1	1.359 GiB	SM-T315_1_20170410144200_wz0b54thsd_fac.zip
SM-T315	PHN Netherlands	T315PHNBNF1	1.339 GiB	SM-T315_1_20170324111913_x3mulaq52k_fac.zip
SM-T315	XEF France	T315OXABNF4	1.252 GiB	SM-T315_1_20170403195226_yqs2jw4qbn_fac.zip
SM-T315	XEZ Czechia	T315XEZBNF3	1.301 GiB	SM-T315_1_20170328112039_nvt7bkwolk_fac.zip

Device specifications

Launched withAndroid
Display diagonal20.3 cm (8")
Display resolution1280 x 800 pixels
Processor frequency1.5 GHz
Rear camera resolution5 MP
Rear camera typeSingle camera
Front camera resolution1.3 MP
Wi-Fi standardWi-Fi 4 (802.11n)
Weight314 g

How to flash T315XXUBNF3

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

T315XXUBNF3 has bootloader binary U (30). Your device must run binary U (30) or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

T315XXUBNF3 is Android 4.4.2 (KitKat) firmware for Samsung Galaxy Tab3 8.0, released for 7 countries, 7 CSC codes. Samsung built it on 2014-06-16.

No. A newer build for SM-T315 is available: T315XXUBPA3. Install it instead of T315XXUBNF3 unless you need this exact version. The previous build was T315XWUANA1.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Tab3 8.0 must be on bootloader binary U (30) or lower.

This build uses bootloader binary U (30). It can be flashed on a Samsung Galaxy Tab3 8.0 running binary U (30) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 15 other builds of this model use the same binary, so you can switch between them in both directions.