Samsung Galaxy Tab3 8.0 T315XXUBNH1
SM-T315 7 countries Android 4.4.2 (KitKat)

Samsung Galaxy Tab3 8.0 T315XXUBNH1 Firmware

Samsung Galaxy Tab3 8.0 T315XXUBNH1 is an Android 4.4.2 (KitKat) firmware for 7 countries, 10 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T315XXUBNG2, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-T315 is available: T315XXUBPA3.

Download firmware
8.8/10 (480)43,291 times
Android 4.4.2 (KitKat)
OS Version
2014-07-31
First release
other regions until 2015-09-11
7
Countries
10
CSC codes
U (30)
Bootloader binary

Bootloader binary U (30). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    7
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-T315
    COS Greece
    		T315COSBNH1T315XXUBNE5 2014-07-31 — 1.386 GiB
    SM-T315_1_20170421101713_rwxum58y9x_fac.zip
    		Download
    SM-T315
    DTM Germany
    		T315DTMBNH1T315XXUBNE5 2014-07-31 — 1.336 GiB
    SM-T315_1_20170421101700_ydwyjrqn55_fac.zip
    		Download
    SM-T315
    LUX Luxembourg
    		T315LUXBNH1T315XXUBNE5 2014-07-31 — 1.279 GiB
    SM-T315_1_20170323101813_6dr7fujnnl_fac.zip
    		Download
    SM-T315
    MAX Austria
    		T315MAXBNH1T315XXUBNE5 2014-07-31 — 1.3 GiB
    SM-T315_1_20170421101639_qfgnwv905f_fac.zip
    		Download
    SM-T315
    MM1, SIN, STH, XSP Singapore
    		T315OLBBNH1T315DXUBNF1 2014-07-31 — 1.3 GiB
    SM-T315_1_20170406183926_mb31oz51dw_fac.zip
    		Download
    SM-T315
    TMH Hungary
    		T315TMHBNH1T315XXUBNE5 2014-07-31 — 1.329 GiB
    SM-T315_1_20170421101726_hk6c4ibwlc_fac.zip
    		Download
    SM-T315
    VNZ New Zealand
    		T315VNZBNH1T315XXUBNE5 2015-09-11 2015-09-11 1.251 GiB
    SM-T315_1_20151016115026_7nqamtv788_fac.zip
    		Download

    No matching downloads

    How to flash T315XXUBNH1

    • T315XXUBNH1 has bootloader binary U (30). Your device must run binary U (30) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of T315XXUBNH1 by region

    Samsung released this build in all regions (1) on the same day, September 11, 2015.

    Device specifications

    • Launched withAndroid
    • Display diagonal20.3 cm (8")
    • Display resolution1280 x 800 pixels
    • Processor frequency1.5 GHz
    • Rear camera resolution5 MP
    • Rear camera typeSingle camera
    • Front camera resolution1.3 MP
    • Wi-Fi standardWi-Fi 4 (802.11n)
    • Weight314 g

    Frequently Asked Questions

    T315XXUBNH1 is Android 4.4.2 (KitKat) firmware for Samsung Galaxy Tab3 8.0, released for 7 countries, 10 CSC codes. Samsung built it on 2014-07-31.

    No. A newer build for SM-T315 is available: T315XXUBPA3. Install it instead of T315XXUBNH1 unless you need this exact version. The previous build was T315XXUBNG2.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Tab3 8.0 must be on bootloader binary U (30) or lower.

    This build uses bootloader binary U (30). It can be flashed on a Samsung Galaxy Tab3 8.0 running binary U (30) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 15 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab3 8.0

    No changelog details available.
    Model firmware by region