Samsung Galaxy Tab 4 8.0 T330XXS1BPL2
SM-T330 3 countries Android 5.1.1 (Lollipop)

Samsung Galaxy Tab 4 8.0 T330XXS1BPL2 Firmware

Samsung Galaxy Tab 4 8.0 T330XXS1BPL2 is an Android 5.1.1 (Lollipop) firmware for Germany (DBT), Netherlands (PHN), United Kingdom (BTU). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T330KXU1BPL1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-T330 is available: T330XXS1BSB1.

Download firmware
9.0/10 (476)13,083 times
Android 5.1.1 (Lollipop)
OS Version
2017-03-10
Build Date
3
Countries
3
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    MODEM/CP Version: T330XXS1BPL2
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-T330
    BTU United Kingdom
    		T330OXA1BPA1 — — — —
    SM-T330
    DBT Germany
    		T330OXA1BPA1 — — — —
    SM-T330
    PHN Netherlands
    		T330OXA1BPA1 2017-03-10 2017-03-10 1.197 GiB
    SM-T330_1_20170307214413_1kzvtlo0vj_fac.zip

    No matching downloads

    How to flash T330XXS1BPL2

    • T330XXS1BPL2 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of T330XXS1BPL2 by region

    Samsung released this build in all regions (1) on the same day, March 10, 2017.

    Device specifications

    • Launched withAndroid
    • Display diagonal20.3 cm (8")
    • Display resolution1280 x 800 pixels
    • Processor frequency1.2 GHz
    • Rear camera resolution3 MP
    • Rear camera typeSingle camera
    • Front camera resolution1.3 MP
    • Wi-Fi standardWi-Fi 4 (802.11n)
    • Weight320 g

    Frequently Asked Questions

    T330XXS1BPL2 is Android 5.1.1 (Lollipop) firmware for Samsung Galaxy Tab 4 8.0, released for Germany (DBT), Netherlands (PHN), United Kingdom (BTU). Samsung built it on 2017-03-10.

    No. A newer build for SM-T330 is available: T330XXS1BSB1. Install it instead of T330XXS1BPL2 unless you need this exact version. The previous build was T330KXU1BPL1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.197 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab 4 8.0 must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy Tab 4 8.0 running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 35 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab 4 8.0

    · The security of your device has been improved.

    No changelog details available.
    Model firmware by region