Samsung Galaxy Tab4 Active T360XXU1BQL1
SM-T360 3 countries Android 5.1.1 (Lollipop)

Samsung Galaxy Tab4 Active T360XXU1BQL1 Firmware

Samsung Galaxy Tab4 Active T360XXU1BQL1 is an Android 5.1.1 (Lollipop) firmware for France (XEF), Netherlands (PHN), United States (XAR). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T360XXU1BPK1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-T360 is available: T360XXS1BRI2.

Download firmware
9.2/10 (479)25,995 times
Android 5.1.1 (Lollipop)
OS Version
2017-12-11
First release
other regions until 2017-12-26
3
Countries
3
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    MODEM/CP Version: T360XXU1BQL1
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-T360
    PHN Netherlands
    		T3601BQL1 2017-12-11 — — — Download
    SM-T360
    PHN Netherlands
    		T360PHN1BQL1 2017-12-11 2017-12-27 1.187 GiB
    SM-T360_1_20190417084414_bqhmrsdq84_fac.zip
    		Download
    SM-T360
    XAR United States
    		T360XAR1BQL1 2017-12-26 2017-12-27 1.227 GiB
    SM-T360_1_20171226130240_jlyj1o58ts_fac.zip
    		Download
    SM-T360
    XAR United States
    		T3601BQL1 2017-12-11 — — — Download
    SM-T360
    XEF France
    		T3601BQJ1 2017-12-11 — — — Download
    SM-T360
    XEF France
    		T360XEF1BQJ1 2017-12-11 2018-01-02 1.187 GiB
    SM-T360_1_20190417084440_2r5xv89s0d_fac.zip
    		Download

    No matching downloads

    How to flash T360XXU1BQL1

    • T360XXU1BQL1 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of T360XXU1BQL1 by region

    First release
    December 27, 2017
    Last region
    January 2, 2018
    Duration
    7 days
    Regions
    3
    1. Day 1 · · 2 regions
      NetherlandsPHNUnited StatesXAR
    2. Day 7 · · 1 region
      FranceXEF

    Device specifications

    • Launched withAndroid
    • Display diagonal20.3 cm (8")
    • Display resolution1280 x 800 pixels
    • Processor frequency1.2 GHz
    • Rear camera resolution3.1 MP
    • Rear camera typeSingle camera
    • Front camera resolution1.2 MP
    • Wi-Fi standardWi-Fi 4 (802.11n)
    • Weight393 g

    Frequently Asked Questions

    T360XXU1BQL1 is Android 5.1.1 (Lollipop) firmware for Samsung Galaxy Tab4 Active, released for France (XEF), Netherlands (PHN), United States (XAR). Samsung built it on 2017-12-11.

    No. A newer build for SM-T360 is available: T360XXS1BRI2. Install it instead of T360XXU1BQL1 unless you need this exact version. The previous build was T360XXU1BPK1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Tab4 Active must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy Tab4 Active running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 23 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab4 Active

    No changelog details available.

    · The security of your device has been improved.

    ※ If your device is encrypted, it must be decrypted before upgrading.

    No changelog details available.
    Model firmware by region