Samsung Galaxy Tab Active T365YDOS1BQA1
SM-T365Y 1 country Android 5.1.1 (KitKat)

Samsung Galaxy Tab Active T365YDOS1BQA1 Firmware

Samsung Galaxy Tab Active T365YDOS1BQA1 is an Android 5.1.1 (KitKat) firmware for Australia (TEL, XSA). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T365YDOU1BOL1: Android updated from Android 5.1.1 (Lollipop) to Android 5.1.1 (KitKat). A newer build for SM-T365Y is available: T365YDOU1BRJ1.

Download firmware
9.3/10 (461)13,223 times
Android 5.1.1 (KitKat)
OS Version
2017-01-18
First release
other regions until 2017-04-27
1
Countries
2
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-T365Y
    TEL Australia
    		T365YTEL1BOL1T365YDOU1BOL1 2017-04-27 2017-04-28 1.246 GiB
    SM-T365Y_1_20170427151126_mid5njcxre_fac.zip
    		Download
    SM-T365Y
    TEL Australia
    		T365Y1BOL1T365YDOS1BQA1 2017-01-18 — — — Download
    SM-T365Y
    XSA Australia
    		T365Y1BOL1T365YDOS1BQA1 2017-01-18 — — — Download

    No matching downloads

    How to flash T365YDOS1BQA1

    • T365YDOS1BQA1 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of T365YDOS1BQA1 by region

    Samsung released this build in all regions (1) on the same day, April 28, 2017.

    Device specifications

    • Launched withAndroid
    • Display diagonal20.3 cm (8")
    • Display resolution1280 x 800 pixels
    • Rear camera resolution3.1 MP
    • Rear camera typeSingle camera
    • Front camera resolution1.2 MP
    • Wi-Fi standardWi-Fi 4 (802.11n)
    • Weight393 g

    Specifications of SM-T365, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    T365YDOS1BQA1 is Android 5.1.1 (KitKat) firmware for Samsung Galaxy Tab Active, released for Australia (TEL, XSA). Samsung built it on 2017-01-18.

    No. A newer build for SM-T365Y is available: T365YDOU1BRJ1. Install it instead of T365YDOS1BQA1 unless you need this exact version. The previous build was T365YDOU1BOL1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.246 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab Active must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy Tab Active running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 8 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab Active

    No changelog details available.
    Model firmware by region