Samsung Galaxy Tab A (2017) T385KKKU1CSK2
SM-T385K 1 country Android 9 (Pie)

Samsung Galaxy Tab A (2017) T385KKKU1CSK2 Firmware

Samsung Galaxy Tab A (2017) T385KKKU1CSK2 is an Android 9 (Pie) firmware for South Korea (KTC). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T385KKKU1BSF2: Android updated from Android 8.1.0 (Pie) to Android 9 (Pie). A newer build for SM-T385K is available: T385KKKS2CUD2.

Download firmware
9.2/10 (474)8,688 times
Android 9 (Pie)
OS Version
2019-11-08
First release
other regions until 2019-11-11
1
Countries
1
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Tab A (2017) use bootloader binary 2 (latest: T385KKKS2CUD2). If your device already runs binary 2, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-T385K
    KTC South Korea
    		T385KKTC1CSK2T385N0KOU1CSI3 2019-11-11 2019-11-21 2.571 GiB
    SM-T385K_2_20210422085736_keurtvfv1r_fac.zip
    SM-T385K
    KTC South Korea
    		T385K1CSK2T385KKKU1CSK2 2019-11-08 — — —

    No matching downloads

    How to flash T385KKKU1CSK2

    • T385KKKU1CSK2 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Launched withAndroid 7.1
    • Display diagonal20.3 cm (8")
    • Display resolution1280 x 800 pixels
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • Front camera resolution5 MP
    • Wi-Fi standardWi-Fi 4 (802.11n)
    • Weight364 g

    Specifications of SM-T385M, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    T385KKKU1CSK2 is Android 9 (Pie) firmware for Samsung Galaxy Tab A (2017), released for South Korea (KTC). Samsung built it on 2019-11-08.

    No. A newer build for SM-T385K is available: T385KKKS2CUD2. Install it instead of T385KKKU1CSK2 unless you need this exact version. The previous build was T385KKKU1BSF2.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.571 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab A (2017) must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy Tab A (2017) running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 5 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab A (2017)

    No changelog details available.
    Model firmware by region